Vitek VT-1736 - Инструкция (Страница 3)

FEATURES:
1. Comfortable and noiseless.
2. Smooth appearance, safe for family use.
3. Unique appearance, novel style.
4. With double pole rocker switch for changing into three different input powers.
5. With thermostat, convenient for controlling the room temperature.
6. With thermal fuse to avoid over heating.
SEAT BASE INSTALLATION:
1. Turn the appliance upside down.
2. Insert two seats to the body along
the arrow direction.
3. Drive two screws tightly.
4. After finishing the installation, turn
the appliance upright.
INSTRUCTION:
1. Turning on the appliance
Insert the plug into the suitable socket for the appliance, revolve the temperature regula
tor to the highest temperature (i.e. revolve the knob clock wise to the end), and then turn
on the power switch. The relevant indicator lamp is lit and the electric heater begins to
work. Note; With regard to the socket with which the appliance is used for the first time or
from which plug is often pulled out, please often check whether the plug fits the socket
well so as to avoid contact fault which will make the socket overheated and burn the plug.
2. Regulating the temperature
When using the appliance, if you feel that the room temperature
is too high, you can lower it by two methods:
(1) Turn off one power switch only turn on the "Middle" or "Low"
switch.
(2) Revolve the temperature regulator anti clockwise from the
highest temperature until the indicator lamp goes out. If the room
temperature still needs to be lowered, you must wait until the
indicator lamp is lit automatically and continue to revolve the
knob until the lamp goes out again. At that time, the electric
heater is in the state of working intermittently. And the indicator
lamp will be lit and go out from time to time.
3. Turn on the fan
If you want to use fan assistant convection function, turn on the
fan switch.
3 10
ENGLISH
1736.qxd 26.05.03 17:48 Page 6