Sony DSC-HX200V - Инструкция (Страница 26)

GB
26
ND Filter Turn the internal ND filter on or off.
Metering Mode
Select the metering mode that sets which part of the
subject to measure to determine the exposure.
Cont. Shooting
Interval Select the number of images taken per second for Burst
shooting.
Bracket Setting Set the type of the bracket shooting.
Scene Recognition Set to automatically detect shooting conditions.
Soft Skin Effect Set the Soft Skin Effect and the effect level.
Smile Shutter
Set to the camera automatically release the shutter when
a smile is detected.
Smile Detection
Sensitivity Set the Smile Shutter function sensitivity for detecting
smiles.
Face Detection
Select to detect faces and adjust various settings
automatically.
Flash Level Adjust the amount of flash light.
Color Mode
Select the vividness of the image, accompanied by
effects.
Color Saturation Adjust the vividness of the image.
Contrast Adjust the contrast of the image.
Sharpness Adjust the sharpness of the image.
Noise Reduction Adjust the image resolution and the noise balance.
Anti Blink
Set to automatically shoot two images and select image
in which the eyes are not blinking.
Movie SteadyShot
Set the strength of SteadyShot in Movie Mode. If you
change the setting for [Movie SteadyShot], the angle of
view will change.
Position
Information* Check the GPS triangulating status and update the
position information.
GPS Log REC* Record the route taken while carrying the camera.
Register Setting
Register the desired modes or camera settings. Set the
mode dial to
(Memory recall mode) to retrieve the
registered settings.