LG VK79103HX - Инструкция (Страница 18)

Always hold the steam safety swith during steam cleaning.
• Align the extension pipe (2) and the terminal part of the steam cleaning vacuum tool (3),
and connect the two completely until you hear the “Click”.
If the steam cleaning vacuum tool and the extension are not completely connected, the
nozzle will be pulled out or the steam will not be generated.
• Connect the hose (1) and the extension pipe (2) completely unit you hear the “Click” sound.
• When you press the “STEAM” button (4) on the function control button on the handle part of
the hose (1), the steam will be generated.
Initial steam generation time is about 2.5 minutes and it will take a little longer for the cloth to
get wet. You must operate the “STEAM” button after filling the water.
• When you press the “ STEAM” button (4) one more time or press the “OFF” button (5), the
steam will stop.
CAUTION
To prevent safety accidents during steam cleaning, if you do not press the steam safety
switch with in 30 seconds, the unit will recognize that the cleaning has been completed and
turn off the power. If you want to use the steam again, press the “STEAM” button one more
time.
• During initial steam nozzle operation, it will operate for 180 seconds (3minutes) even
when you do not press the steam safety switch.
• About 2.5 minutes after pressing the “STEAM” button, you can start the cleaning and after
about 3 minutes, you can check the steam with your eyes.
• The cloth can get wet faste depending on how the steam vacuum tool is used and the time.
At this time, when you replace the cloth, you can clean with a dry cloth.
17