Binatone SI-4022 - Инструкция (Страница 6)

6
While holding the iron in a vertical position, aim its sole plate
towards the articles to be ironed and push the steam burst
button (8) to produce a directional strong burst of steam from
the soleplate. Push the button several times with 5-7 seconds
intervals until the article is fully refreshed. If during the process
your water tank (5) runs out of water, disconnect the appliance
from the mains outlet, wait till it cools down, refill the tank and
plug the appliance back into the power supply and continue the
process.
Spray
Using the water spray (7) will help when ironing details of the
article (cuffs, trimmings, plackets, etc) or clothes, which demand
“ ” (low temperature) ironing, when steam ironing is not possible.
Push the button several times to moisten the material.
Auto shut-off function (for SI-4220)
For safety reasons, your iron will automatically switch off if it’s
left without supervision:
upright for more than 8 minutes, or
flat for more than 30 seconds.
The operation indicator (11) will start blinking.
The iron will switch on again, when you move it. After that the
operation indicator will stop blinking.
5. When you have finished cleaning or ironing, do not
forget to switch the iron off by putting the steam control knob (9)
into the “0” position, the temperature control knob (10) – to the
minimal position and unplugging the appliance from the mains
supply outlet.
CARE AND CLEANING
Cleaning of the sole plate
Do not use any abrasive substances and
materials to clean the sole plate.
Cleaning of internal parts of the
appliance
Warning: in areas with very hard water it is recommended
that you regularly remove scale from the appliance to
maintain it in good working order. Excess lime scale
may result in damage or malfunction of your product.
If in your area the water is soft and you have average amounts
of clothes to be ironed then we recommend you to de-scale every
month. If the water in your area is very hard or if you iron fre-
quently, then we recommend you de-scale more often.
Your iron has a self-cleaning function, which allows you to
clean the internal parts of the appliance from scale or dust. To use