Aintenance and care, Roubleshooting, Disposal of batteries continued – Инструкция по эксплуатации Bissell Беспроводной пылесос Lift-Off Floors & More для ежедневной уборки

Страница 9

Advertising
background image

w w w . b i s s e l l . c o m

9

M

aintenance and care

disposal of batteries continued

4.

Separate left and right cover.

5.

remove the entire battery assembly from

the cover.

6.

remove (3) Phillips head screws between

the motor and battery bracket.

7.

Pull the motor, PCB, fuse, and inner wire

through the middle of the battery bracket,

separating the battery bracket and single

battery from the motor, PCB, and inner wire.

8.

Cut wires from the PCB and fuse to the

battery bracket.

9.

Keep battery pack together – Do NoT

separate individual batteries. For specific

disposal instructions, please contact your

local authorities for requirements and

regulations on safe disposal or recycling

facilities in your area.

10.

Discard remainder of product

caution: Disconnecting the battery will

destroy the appliance and void the warranty.

T

roubleshooting

Vacuum won’t turn on

Possible causes

Remedies

1. Battery isn’t fully charged

1. Charge battery. Follow charging battery instructions on page 5

brush roll not turning

Possible causes

Remedies

1. Brush roll is jammed

1. Remove obstruction. Follow instructions on pages 7 and 8

2. Brush roll needs to be reset

2. Follow instructions on page 8

3. Broken brush roll belt

3. Follow instructions on page 8

Vacuum cleaner has low suction

Possible causes

Remedies

1. Dirt container is full

1. Empty dirt container

2. Dirt container is not installed properly

2. Position container correctly and snap firmly into place

3. Foot is loose

3. Make sure foot is fully inserted into body of unit

4. Filters need cleaning

4. Follow filter instructions on page 7

5. Filters need replacing

5. Please call local BISSELL Consumer Services.

Advertising