Binatone HB-7330 - Инструкция (Страница 6)

6
INSTRUCTIONS FOR USE
Use of blender and whisk:
1. Insert selected whisk or blender (6, 7) in
the relevant opening of the appliance body
(1 ) until you hear a click. Press release but-
tons (5) in order to release whisk or blender.
2. Before turning on, please, make sure that
whisk or blender (6,7) is inserted correctly!
3. Plug the appliance into mains.
4. Lower whisk or blender into the bowl with the product to be
processed or into blending glass (13).
Note: blades of blender should be completely plunged into
the processed product in order to prevent sputtering.
5. To switch on the appliance, select desired speed using speed
selector (2), then push the button to set normal speed mode
(3) or the button to set turbo speed mode (4). Keep the
button pressed while the appliance is operating.
6. If turbo mode is used the appliance operates at maximum
speed. It is impossible in this case to change speeds using
speed selector (2).
7. Unplug the appliance from mains after use.
8. The appliance can be used with any bowls or containers.
Use of mincer:
1. The bowl is suitable for mincing meat, cheese, onions, herbs,
garlic, carrots, nuts etc. and to prepare fruit, vegetable and
alcoholic beverages, mash, liquid dough etc. Before mincing,
cut the product into smaller parts, remove shell, bones, ten-
dons and cartilage.
2. Install mincer blade (10) into the bowl (11).
3. Place products into the mincer bowl (11).
Note: when processing solid products the bowl must only be
2/3 filled!
4. Install the mincer gear (8) on the bowl (11).
5. Place the body of appliance (1) on mincer gear (8). Align appro-
priate openings in the body (1) and in the mincer gear (8).
12. Power cord
13. Blending glass
BEFORE USE
Unpack the appliance and wash blender,
mincer and whisks (6, 7, 8), blade (10) and
bowl (11), wipe appliance body (1) and power
cord (12) of the appliance with moisturized fabric
and then wipe them dry.