Binatone HAS-1040 - Инструкция (Страница 5)

ENGLISH
5
! Please follow all the requirements of this guide.
! Do not use the appliance if it has mechanical defects (dents,
cracks etc.), get it checked by the nearest authorized service
center.
! To avoid mechanical defects and damage, take care during the
appliance transportation.
SPECIAL SAFETY MEASURES
! Care should be taken to prevent foreign objects
from entering the appliance as they may cause
motor failure and premature breakdown of the
appliance as well as electric shock.
! Never cover the appliance during use. When using
the hairdryer, make sure the air filter is clean and not blocked.
! Switch the appliance off when not in use even if it is for a short
period of time.
! Do not use the appliance near a bathtub, washbasin, pool or
other sources of water.
! Avoid direct contact between attachments and your skin.
! For extra safety we recommend the installation of a residual
current device (RCD) with a tripping current of no more than
30 mA in the mains circuit of the bathroom. Consult a qualified
electrician for help.
! This appliance is equipped with an automatic overheat protec-
tion. When overheated, the appliance will switch itself off. In
cases of overheating unplug the appliance from the wall out-
let. Let the appliance cool down for several minutes and then
plug it in again.
DESCRIPTION
1. Housing
2. Hair dryer working mode switch
0ff – the appliance is switched off;
Low –warm airflow for light curling and gentle
hair drying;
High –hot airflow for strong and intensive hair
curling and drying;
Cool – cold airflow to fix the styling.
3. Attachment release button
4. Thickener
5. Small diameter round styling brush (25mm)
6. Mid-size thermal brush
7. Large diameter curling-irons (38 mm)
a) Lever
b) Clamp
c) Working area
8. Rotating power cord
9. Carrying bag