Binatone CI-110 - Инструкция (Страница 6)

6
INSTRUCTION MANUAL
1. Place the appliance on its base (7) upon a
dry smooth horizontal surface.
2. Connect the power cord plug to the electric
mains and set the switch (5) into “I” posi-
tion. The light indicator (6) will light up, show-
ing that the appliance is in operation.
3. Wait for the appliance to heat up to the
required temperature (approximately 4-5 minutes).
4. Select a small lock of hair (approximately 15 mm wide) and
comb it from roots to tips.
5. Press the lever (4) to open the hair clip (3).
6. Place the ends of the hair between work surface (2) and hair
clip (3).
7. Rotate the appliance by the handle (9) to wind the hair onto
the work surface. For your convenience you may rotate the
handle (9) with one hand and support the appliance by the
non-heating tip (1) with the other.
8. Treat each lock for around 10- 20 seconds.
9. Carefully release the hair by lifting the lever (4). Let the hair
cool down.
10.Continue operation as described above to treat all of your
hair.
11.Always unplug the appliance immediately after use.
MAINTENANCE
AND CLEANING
1. Clean the irons after every use.
2. Unplug the device and wait until it completely
cools down.
3. Use a soft damp cloth to clean the working
surface of the appliance (2) and the handle
(9). Do not allow water or other liquids to
get inside the appliance.
4. If you are not going to use the appliance for some time, then
let it completely cool down, place it in the box and store in a
safe dry place out of reach of children.
AFTER-SALES SERVICE
If your appliance does not operate or
does not operate properly, contact an au-
thorized service center for consultancy or
repair.
The warrantee does not cover:
– product packing, consumables and ac-
cessories (tips, etc.);
– mechanical damages and natural wear of the product;
– failures due to overloading, improper or careless maintenance,
penetration of liquids, dust, insects and other foreign matters inside