Binatone EK-1720 - Инструкция (Страница 6)

6
! Do not take the electric cord out of the socket during operation
of the appliance. You should first turn it off.
! After using the appliance let it cool for a few minutes. After
that you can boil water in it again.
DESCRIPTION
OF COMPONENTS
Fig. A:
1. Housing
2. Hinged lid
3. Lid opening button
4. Removable filter
5. Water level scale
6. LCD (Fig. B)
– boil water
– keep warm
– boiling extend
7. Function switch
8. Tuning buttons
9. Heater activation knob
10.Cord storage base
BEFORE USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm
soapy water, rinse carefully and wipe dry. In
case of unusual odor fill the kettle up to a maxi-
mum level with vinegar solution (1 element of
9% vinegar per 20 elements of water), let the
kettle soak for an hour. Then wash out the kettle with tap water,
boil water in the kettle and pour it out.
INSTRUCTIONS FOR USE
For boiling of water:
1. Place the kettle with power base on dry hori-
zontal surface.
2. Take the kettle off the base (10), open the
lid (2) by pushing the button (3) and fill the
kettle with water.
3. Make sure the water level stays between the minimum and the
maximum marks on the water level scale (5). Do not switch on
an empty kettle.
4. Close the lid (2) and put the kettle on the base (10).
5. Put the plug in the socket making sure that the mains supply
matches the voltage requirements indicated on the appliance.
6. Switch the kettle on by the switch (9). The appliance will auto-
matically turn off as soon as water boils.