English, Useful tips, Selection of temperature settings – Инструкция по эксплуатации Binatone SI-4440 Newton
Страница 9: Ironing of selected fabrics
9
ENGLISH
tank (5) by opening the cover (4) and holding the iron upside
down over the sink. Store the appliance in the upright standing
position.
USEFUL TIPS
Selection of temperature settings
X Before ironing, we recommend that you orga-
nize your clothes, into the types of material
and the recommended temperature settings.
X We recommend that you start ironing, using
the lower temperature settings first: the appli-
ance gets hot quicker than it cools down.
X When ironing articles made with combinations of fibers, start
with the temperature recommended for the most delicate ma-
terial first (for example, to iron a cloth made of cotton and
polyester select the temperature recommended for ironing
polyester first).
X If the manufacturer’s label, which gives the recommended
temperature, is missing and the type of material is known,
follow the recommendations below.
Fabric type
Temperature
Steam ironing
control settings
Acrylic
Polypropylene
•
No
Polyethane
Acetate
Triacetate
Polyester
Polyamide
••
Yes
Nylon
Viscose
Rayon
Silk
••
Not recommended
Wool
••
Yes
Cotton
•••
Yes
Linen
•••
Yes
X If you do not know the fabric type, find a place on the article;
which will not be seen and test iron it to select the appropriate
temperature, start with the minimum setting.
Ironing of selected fabrics
X Do not use the water spray button (7) while ironing silk ar-
ticles: drops of water leave spots on silk garments.
X Wool, velour, velvet and similar pile fabrics must be ironed on
the inside.
X To prevent shiny marks we recommend that you iron woolen
articles through a thin cotton cloth, set the steam control knob
into the maximum position.