WORX Tools WU650 - Инструкция (Страница 9)

Random orbital sander ENG
20. Do not sand magnesium material due to the
risk of fire.
21. Wear eye protection when operating this
tool.
SYMBOLS
OPERATING
INSTRUCTIONS
1. ON/OFF SWITCH
To start your sander, depress the protective
cover over the switch at the position marked
”I”. To stop your sander, depress the protective
cover at the position marked “0” (See A).
2. VARIABLE SPEED CONTROL AND
FUNCTION
The unit is equipped with a variable speed
control. This allows you to adjust the speed in
order to achieve different finishes (See B).
3. HAND GRIP AREA
Your sander is designed to be held either
around the main housings (See D), or by the
top of the main housing (See C). When sanding
for long periods at a time, it is recommended
you periodically alternate between the two
holding positions.
4. CHANGING HOOK&LOOP SANDPAPER
The sandpaper and sanding disc are provided
with a hook and loop attachment system to
allow quick and easy changing of the sanding
and polishing accessories. Firstly, remove any
dust or other objects from the hook and loop
on the sanding disc and sandpaper. As the
sandpaper has dust extraction holes you must
align these with the holes in the sanding disc,
otherwise the dust extraction will not function.
To remove the sandpaper, lift one corner of the
paper and pull off from the sanding disc (See
E).
5. DUST BAG
Always operate your sander with the dust bag
fitted. For the best performance always empty
the dust bag in time. Open the zip and empty
the dust from the bag. To remove the bag (See
F). To refit the bag, firmly push the mounting
bracket into the location on the sander housing
(See G).
6. ORBITAL SANDING
Guide your sander parallel to the working
surface and move it in circles or in a cross
pattern. Do not tilt the tool in order to avoid
deep unwanted sanding marks. The amount of
material removed is determined by the speed
of the sanding disc and the grit size used. The
speed of the sanding disc diminishes relative
to the pressure applied to the tool. For faster
removal, do not increase pressure on the tool,
Read the manual
Warning
Wear eye protection
Double insulation
Wear hearing protection
Wear dust mask
09 08
RU-WU650-M-060726.indd 9 2006-7-26 14:10:52