Инструкция по эксплуатации ZELMER 40Z012

Страница 26

Advertising
background image

28

GW40-006_v01

EN

Dear Customer!

Congratulations on your choice of our appliance, and

welcome among the users of Zelmer products.

In order to achieve best possible results we recommend

using exclusively original Zelmer accessories. They have

been specially designed for this product.

Please read these instructions carefully. Pay your

special attention to important safety instructions,

in order to prevent accidents and/or avoid damaging

the appliance. Keep this “Instructions for use” for future

reference.

The appliance is intended for household use, indoors

only. The heating surface is coated with special non-stick

layer, therefore do not use sharp utensils for turning grilled

products.

Use only soft wooden spatula.

Safety and proper use instructions

Connect the appliance to AC mains supply 230 V with

grounding. You may use an extension cord (3 conductors)

conducting current intensity min. 10 A.

The supplying cord and extension cord can not be in

touch with water or other liquids.

Do not unplug pulling by the cord.

Do not start up the appliance, In case the supplying cord

or housing, thermostat and grids are visibly damaged.

Make a visual inspection before each start-up.

Use the appliance with original thermostat only – with

supplying cord and accessories.

If the non-detachable part of the cord is damaged,

it should be replaced by the producer or at a proper

service point or by a qualified person in order to avoid

any hazards.

The appliance should be repaired by trained staff only.

Improper repair can result in serious hazard for a user. In

case of defects we recommend you to contact qualified

service desk.

In order to provide additional protection, it is

recommended to install the residual current device

(RCD) with nominal residual power not exceeding

30 mA. You should contact the professional electrician

in this concern.

Keep the proper space over and around the grill to

provide an easy air flow. Do not let the appliance touch

curtains, wall-paper, cloths, towels or other combustible

materials during operation. Do not use under cupboards

or curtains. Be careful in case of surface sensitive for

heat – thermo isolating pad is recommended.

Place the appliance only at dry, flat, firm and heat-

resistant surface.

Do not place the appliance on or near open fire, hot

burner or heated oven.

ATTENTION: It is not allowed to use charcoal or similar

combustive materials.

Before usage make sure that grease drip tray and grill

are properly assembled on the base.

Do not use your grill without grease drip tray assembled.

Fill the grease drip tray with water up to max level, to

reduce smoke emission and make cleaning easier.

Do not move the grill pulling by supplying cord.

Do not let the supplying cord touch hot surfaces.

Do not touch the plug and temperature adjustment knob

with wet hands.

Do not touch hot surfaces.

If necessary to remove the grill, at first unplug it. After

cooling down, move carrying with handles using kitchen

gloves, as the handles can be still hot. Take special

safety measures!

Use not sharp, the best wooden utensils to turn the ford,

in order to avoid scratching non-sticking surface.

In case it is necessary to use sharp utensils and knives,

i.e. to cut something when grilling, at first remove the

product from the grids.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction

concerning use of the appliance by a person responsible

for their safety.

Children should be supervised to ensure that they do not

play with the appliance.

The appliance is not intended to be operated by means

of an external timer or separate remote-control system.

It s not allowed to cover the heating plate with aluminium

foil, lid, etc, which can result with heat accumulation and

damage plastic parts and the layer

The appliance is intended solely for household use,

indoors.

Apply the recommended temperature setting. You can

adjust the temperature during grilling if necessary.

Let the appliance cool down before cleaning or

disassembling.

Do not use aggressive detergents like cream, milk,

paste etc. to clean the casing. They can remove graphic

symbols such as: scales, marking, caution signs, etc.

Always disassemble thermostat before immersing in

water to avoid electric shock.

Do not wash the parts in dishwasher.

Do not immerse temperature sensor, supplying cord or

plug neither in water nor in any other liquid.

Dry thoroughly after cleaning.

Make sure the appliance

is completely dry before thermostat assembling.

Advertising