ZELMER 28Z017 - Инструкция (Страница 52)

52
How to fill the water
Disconnect the iron from mains supply –
outlet.
Move the – Steam Control Knob to (7)
position .
Release the water inlet cover – (5) and fill
water through the water inlet hole.
Fill up to the „ – MAX” level marked on the side of the water tank.
Close the water inlet cover – (5).
For best result, it is advisable to use demineralised water or distilled
water.
Do not use chemically descaled water or any other liquids.
Preparation for operation – first time ironing
Remove any protective films or stickers from the sole plate and the –
cabinet.
Unwind and straighten the power cord. –
Fill the water tank with demineralised water or distilled water. (See –
How To Fill Water).
Connect the iron to a suitable mains supply outlet. –
Turn the – Temperature Dial (2) in clockwise direction to position –
control light (4) glows.
Control light goes off when the required temperature is reached. –
Move the – Steam Control Knob (7) to position.
Steam starts coming out from the holes in the sole plate after putting –
the iron in horizontal position and after Burst of steam knob (9).
Begin first time ironing with an old towel. –
When the water tank is empty and there is no more steam produced; –
the preparation work is completed. The iron is now ready for proper
use.
After ironing
Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;
the iron is switched off.
Move the – Steam Control Knob (7) to position.
Disconnect the iron from mains supply outlet. –
When the iron gets cool completely, store it vertically in a safe place. –
Spraying
This function can be used any time –
and is not affect any setting.
Fill the water tank as described in –
How to Fill Water.
Aim the – nozzle (6) to the garment.
Press the – Spray Button (8).
It may be necessary to press the spray button a few times to start this –
function.
Dry ironing – Always follow the garment manufacturer’s ironing
instructions mentioned at the garment label.
Unwind and straighten the power cord. –
Move the – Steam Control Knob (7) to position.
Connect the iron to a suitable mains supply outlet. –
Turn the – Temperature Dial (2) in clockwise direction to; set , or
position.
Control light (4) – glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The –
iron is now ready for use.
Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;
the iron is switched off.
Disconnect the iron from mains supply outlet. –
When the iron gets cool completely, store it vertically in a safe place. –
Steam ironing – Always follow the garment manufacturer’s
ironing instructions mentioned at the garment label.
Unwind and straighten the power cord. –
Fill the water tank with demineralised water or distilled water. (See –
How To Fill Water)”.
Connect the iron to a suitable mains supply outlet. –
Turn the – Temperature Dial (2) in clockwise direction to position.
(For optimum steam quality, do not use or setting for steam
ironing).
Control light (4) – glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The –
iron is now ready for use.