ZELMER 28Z025 - Инструкция (Страница 64)

64 GW28-022_v01
Get to know your iron
1. Sole plate
2. Water Spray button
3. Burst of steam button
4. Steam control knob
5. LCD display
6. LCD display switch and
Temperature increasing knob
7. Temperature reducing knob
8. Water inlet cover
9. Spraying nozzle
10. Self-cleaning knob
11. Grommet cord
12. Power cord
LCD display
A. Type of fabric indicator
B. Steam ironing indicator
C. Temperature setting indicator
D. Maximum temperature reached
indicator.
E. Auto shut-off indicator
F. Position number
Never iron and clothes or fabrics that are being worn by human or pets. –
Never direct the steam to human or pets. –
Use self-cleaning function at least once a month. –
Hints for ironing
1. Sort out the articles to be ironed according to the type of fabric. This will
minimize the frequency of temperature adjustment for different garments.
2. Test ironing a small area on the backside or inside the garment if you
are unsure about the type of fabric. Start with a low temperature and
increase gradually.
3. Wait for about three minutes before ironing heat sensitive fabrics. Tem-
perature adjustment needs certain time to reach the required level no
matter it is higher or lower.
4. Delicate fabrics such as silk, wool, velour, etc. are best ironed with an
ironing cloth to prevent shine marks.
5. You may need a few times of press to activate the spray, burst and verti-
cally burst function.
6. Read the garment labels and follow the manufacturer’s ironing in-
structions which are often shown by symbols similar to the following:
Temperature settings
○ Acetate
○ Elastics
○ Polyamide
○ Polypropylene
○ Cupro ○ Triacetate
○ Polyester ○ Viscose
○ Proteins ○ Wool
○ Silk
○ Cotton
○ Linen
Technical data
The iron technical parameters are included at the name plate. The iron is
I class appliance, equipped with supplying cord and plug with grounding.
ZELMER iron meets the requirements of effective standards.
The appliance meets the requirements of the following directives:
Low Voltage Device (LVD) – 2006/95/EC. –
Electro- Magnetic Compatibility (EMC) – 2004/108/EC. –
The product is marked with CE symbol on the name plate.