Hyundai H-CDM8017G - Инструкция (Страница 13)

12 13
Operation Operation
interrupted. “S” represents a short time period
of 30 seconds, and “L” represents a long time
period of 90 seconds.
MASK DPI/MASK ALL
During AF search, PI stations and non-RDS
(Radio Data Station) stations with strong signal
will be masked, in the latter case, the non-RDS
stations may cause interference, resulting the
real AF to be masked due to the misjudgment
of the radio under interference. Rotate the VOL
knob to select the desired mode: MASK DPI and
MASK ALL. During MASK DPI mode, the unit
will mask only the AF which has different PI, this
is the default mode; during MASK ALL mode,
the unit will mask the AF which has different PI
and no RDS signal with high field strength.
Disc operations
Insert/Eject disc
• Press OPEN button to open the front
panel. Insert the disc into the slot with the
printed side facing upward into the slot. The CD
will play automatically. Close the front panel.
• Open the front panel and press EJECT
button to eject the disc. If the disc is not
removed from the slot within 10 seconds, it
will automatically be loaded into the slot again.
When the disc is ejected and removed, the unit
will automatically switch to radio mode.
Pausing playback
To ensure good system performance,
wait until the unit finishes reading the disc
information before proceeding. Press 1/PLAY/
PAUSE button to pause the playback. Press
again to resume the playback.
Playing the previous/next track
During playback press NEXT or PREV
button to play next or previous track
correspondingly.
Fast forward/backward playback
Press and hold NEXT or PREV button to fast
forward or reverse correspondingly. Release
the button when the desired location is found.
Folder selection
Press 6 button to go to the next folder. Press
5 button to go to the previous folder (only for
MP3 discs containing folders).
Intro playback
You can play the beginning of every track
for several seconds in sequence. Press 2/SCN
button to start intro play. Press again to cancel.
Repeat playback
During disc playback, press 3/RPT button to
repeat the current track playback. Press again
to cancel.
Random playback
During disc playback, press 4/SHF button
to start random playback of the tracks. Press
again to cancel.
Searching file/directory
Press button AMS button once to enter
“Searching by track number” mode. The track
number will blink on the display. Rotate VOL
knob to select the track number. Press BAND
button to confirm the selection and play the
selected song.
Also, after pressing AMS button you can
directly input the number of the needed track
pressing the buttons according to the below
table:
Button Number
1/PLAY/PAUSE 1
2/SCN 2
3/RPT 3
4/SHF 4
5 5
6 6
MODE or PTY 7