Trouble check – Инструкция по эксплуатации Sony CCD-TR640E

Страница 93

Advertising
background image

93

Additional information /

Дополнительная информация

Trouble check

Symptom

Cause and/or Corrective Actions

• The START/STOP MODE switch is set to 5SEC or

.

m Set it to

. (p. 19)

• The battery is dead.

m Use a charged battery pack or the AC power adaptor. (p. 9,

32)

• Moisture condensation has occurred.

m Remove the cassette and leave the camcorder for at least 1

hour. (p. 85)

• You pressed DATE and TIME together for more than 2

seconds.

m The camcorder is not malfunctioning. You may start

recording. Flashing will stop soon.

• The lithium battery is weak or dead.

m Replace the lithium battery with a new one. (p. 74)

• The POWER switch is set to CAMERA or OFF.

m Set it to PLAYER.

• The tape has run out.

m Rewind the tape or use a new one. (p. 26)

• STEADYSHOT is set to OFF.

m Set STEADYSHOT to ON. (p. 62)

• The Steady Shot function does not work when the wide mode

is set to 16:9 FULL.

• FOCUS is set to MANUAL.

m Set it to AUTO. (p. 50)

• Shooting conditions are not suitable for autofocus.

m Set FOCUS to MANUAL to focus manually. (p. 50)

• The START/STOP MODE switch is set to 5SEC or

.

m Set it to

. (p. 19)

• A title is displayed.

m Stop superimposing the title. (p. 55)

• The stereo tape is played back with HiFi SOUND set to 1 or 2 in

the menu system.

m Set to STEREO in the menu system. (p. 34)

• The picture has been recorded with WIND set to ON in the

menu system.

m When there is no wind, set it to OFF. (p. 34)

• You are playing back a portion of tape on which you wrote or

erased the index signal. This is not a malfunction. (p. 72)

• Reset the date and time. (p. 76)

Recording stops in a few seconds.

The date or time indicator
disappears.

Data code becomes “--:--:--”.
(CCD-TR845E only)

Excessive high-pitched sound is
heard. (CCD-TR840E/TR845E only)

The fader function does not work.
(CCD-TR511E/TR640E/TR840E/
TR845E only)

The autofocusing function does not
work. (CCD-TR511E/TR640E/
TR840E/TR845E only)

The Steady Shot function does not
activate. (CCD-TR640E/TR840E/
TR845E only)

The tape does not move when a
video control button is pressed.

No sound or only a low sound is
heard when playing back a tape.
(CCD-TR840E/TR845E only)

The date or time indicator is flashing.

{

and 6 indicators flash and no

function except for cassette ejection
works.

The cassette cannot be removed from
the holder.

(to be continued)

Advertising
Эта инструкция подходит к следующим моделям: