Sony KDL-52 W4000 - Инструкция (Страница 28)

28 GB
Analogue Set-up
Programme List
Display Select “Off” to hide the list of analogue channels from the XMB TM (Xross Media
Bar).
Auto Tuning Tunes in all the available analogue channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters.
Programme Sorting Changes the order in which the analogue channels are stored on the TV.
1 Press
F / f to select the channel you want to move to a new position, then
press .
2 Press F
/
f
to select the new position for your channel, then press .
Manual Programme
Preset Before selecting “Label/AFT/Audio Filter/LNA/Skip/Decoder”, press
PROG +/– to select the programme number with the channel. You
cannot select a programme number that is set to “Skip” (page 26).
Programme/System/Channel
Presets programme channels manually.
1 Press F / f to select “Programme”, then press .
2 Press F
/
f
to select the programme number you want to manually tune (if
tuning a VCR/ DVD recorder, select channel 00), then press RETURN .
3 Press F
/
f
to select “System”, then press .
4 Press F / f to select one of the following TV broadcast systems, then press
RETURN .
B/G: For western European countries/regions
I: For the United Kingdom
D/K: For eastern European countries/regions
L: For France
5 Press F / f to select “Channel”, then press .
6 Press F
/
f
to select “S” (for cable channels) or “C” (for terrestrial channels),
then press
g
.
7 Tune the channels as follows:
If you do not know the channel number (frequency)
Press F / f to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press F / f .
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your
VCR/ DVD recorder channel number.
8 Press to jump to “Confirm”, then press .
9 Press
f
to select “OK”, then press .
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected
channel. This name will be displayed briefly on the screen when the channel is
selected.
To input characters, follow steps 1 to 3 of “Edit:” (page 26).
AFT
Allows you to fine-tune the selected programme number manually if you feel
that a slight tuning adjustment will improve the picture quality.
You can adjust the fine tuning over a range of –15 to +15. When “On” is
selected, the fine tuning is performed automatically.
010COV.book Page 28 Wednesday, March 26, 2008 2:49 PM