Zanussi FLS502 - Инструкция (Страница 17)

ENGLISH
17
Installation
Unpacking
You are advised to keep all the packaging for re-use in
case the appliance has to be transported again.
Before starting the machine up, the transport
security bolts must be removed as follows.
■ Unscrew and remove the three rear transit bolts
(using a spanner).
■ Lay the machine gently on its back, making sure that
the hoses are not squashed.
We suggest a polystyrene angle bracket from the
packing is placed on the floor before tilting it back to
avoid the hoses being squashed.
■ Carefully remove the polyethylene bags located at
the base of the machine by pulling them toward the
centre of the machine.
■ Place the machine in an upright position and remove
the three plastic bolts.
■ Plug the 3 holes with the plastic plugs which you can
find in the envelope containing the instruction
booklet.
2
1
AL009
P0287
P0018
P0002
P0001