Beko WMB 81231 PTLMC - Инструкция (Страница 19)

19 EN
• Ежедневная (Daily express)
Use this programme to wash your lightly
soiled cotton clothes in a short time.
• Темные вещи (Dark wash)
Use this programme to wash your dark
coloured laundry or the laundry that you
do not want it get faded. Washing is
performed with little mechanic action and
at low temperatures. It is recommended
to use liquid detergent or woolen
shampoo for dark coloured laundry.
• Микс 40 (Mix 40)
Use this programme to wash your cotton
and synthetic clothes together without
sorting them.
Special programmes
For specific applications, select any of the
following programmes.
• Полоскание (Rinse)
Use this programme when you want to
rinse or starch separately.
• Отжим+Слив (Spin + Drain)
Use this programme to apply an
additional spin cycle for your laundry or to
drain the water in the machine.
Before selecting this programme, select
the desired spin speed and press Start /
Pause button. First, the machine will drain
the water inside of it. Then, it will spin the
laundry with the set spin speed and drain
the water coming out of them.
If you wish to drain only the water
without spinning your laundry, select the
Pump+Spin programme and then select
the No Spin function with the help of Spin
Speed Adjustment button. Press Start /
Pause button.
C Use a lower spin speed for delicate
laundries.
Temperature selection
Whenever a new programme is selected,
the maximum temperature for the
selected programme appears on the
temperature indicator.
To decrease the temperature, press
the Temperature Adjustment button.
Temperature will decrease gradually.
C If the programme has not reached
the heating step, you can change the
temperature without switching the
machine to Pause mode.
Spin speed selection
Whenever a new programme is selected,
the recommended spin speed of the
selected programme is displayed on the
spin speed indicator.
To decrease the spin speed, press
the Spin Speed Adjustment button.
Spin speed decreases gradually.
Then, depending on the model of the
product, "Rinse Hold" and "No Spin"
options appear on the display. See
"Auxiliary function selection" section for
explanations of these options.
C If the programme has not reached the
spinning step, you can change the
speed without switching the machine
to Pause mode.