Elenberg FS-3010 - Инструкция (Страница 3)

3
Assembly
1. Put the end cap at the end of the cross base.
2. Fasten the lower pipe on the cross base with screw, and cover it with
base cover.
3. Slide the base cover onto the cross base along the lower pipe.
4. Pull the extension pole out, and tighten the stand pipe and steal pipe
with screw A.
5. Place the motor and switch box firmly on the top of the extension pole.
6. To finish assemble the guard and blade on the front part of the motor.
7. To change the direction and height, loosen the screw A and adjust the
extension pole at a suitable position then tighten the screw A again.
8. If the blade is shaking, please change the blade into another direction,
then try it again.
Unit description
1. GUARD
2. BLADE
3. EXTENSION POLE
4. SCREW A
5. BASE COVER
6. END CAP
Address to service center for consultation, when the service life of prod-
uct has expired. Otherwise the further operation can entail impossibility of
normal use of the product.
ENGLISH
Service life of the given product - 3 years from the moment of sale