Elenberg KL-1940S - Инструкция (Страница 7)


• 1,7 L capacity
• 360° rotatable base
• Concealed stainless steel heating element
• Removable anti-calc filter
• Water level
• Automatic cut-off
1. Kettle lid
2. Detachable filter
3. Spout
4. Kettle body
5. Cordless base
6. Power cord
7. Power switch
8. Led
9. Water gauge
10. Handle
11. Lid opening switch
Fill this kettle with at least enough water to cover the MIN mark, don’t overfill it - see im-
portant safe guards section
Put the kettle on the base and plug in and switch on at the wall socket.
Operate the knob to so switch ON.
When the water boils, the kettle will auto switch-off, as it does so, a drop of the water
emerge from the vent in the base of the kettle control housing, this is normal and is not a
fault, If you are using the kettle first time, pour away the boiling water and refill, to reboil,
switch on again, if the kettle just has the switch off, wait a minute or so before switching
it back on again If you do not put in the enough water, or switch on the kettle when it is
empty, the safe cut-out will switch off automatically, if this happens, wait a few minute for
the element to cool, then refill and use as normal.
If you live in a hard water area, scale will form on the inside of your kettle and its bottom
(element area), this could cause the kettle to malfunction and may damage the kettle invali-
dating the warranty, it is essential that regular descaling takes place as following:
• Soft scale may be re-moved by the cool kettle regular, remove the hard scale using
either a proprietary descaling product suitable for the plastic kettle (following the in-
struction carefully), or citric acid crystal, we will recommend using citric acid crystals as
following:
FEaturES
unit DEScriPtion
inStruction For uSE
cLEaninG anD DEScaLinG