Saturn ST-CC7130 - Инструкция (Страница 5)

8
6
6. Install the steam head to superior tube
hooking.
Filling the water fill tank
1. Unplug the power cord, and turn the
lighted ON/OFF switch to the “OFF”
position.
2. Remove the water fill tank; turn it
upside down, and unscrew the valve cap.
3. Fill the water fill tank with cool water,
and replace the valve cap.
NOTE: To prolong the lifetime of your
steamer, we recommend using
distilled
water.
NOTE: Do not substitute another
water tank for the one designed for
this unit.
4. Place the water fill tank on the water
reservoir.
CAUTION: Do not let the steamer
operate with a dry water fill tank, or
damage to the unit could occur.
Quick Storage
1. Turn the ON/OFF switch to “OFF”.
2. Unplug the power cord.
3. Wrap the hose around the telescopic
pole one time.
4. Hang the steam nozzle from the
steam nozzle holder.
5. Loosen the three fasteners on the
telescopic pole
6. Push down on the pole top; the pole
will collapse to a compact height.
7. Roll the unit to a convenient storage
location.
Cleaning and Long-term Storage
We recommend you follow this procedure
at least once per week. Use of distilled or
de-mineralized water reduces the need to
clean an prolongs the life of your steam
1. Turn the lighted ON/OFF switch to
“OFF”.
2. Unplug the unit from the power
outlet.
3. Wait for the unit to cool completely
(at least 30 minutes).
4. Remove the hose and the telescopic
pole and set them aside.
5. Carry the unit to a sink or tub.
6. Remove and drain the water fill tank.
Rinse the water tank with fresh water and
drain completely.
9
7. Flush the unit by filling the water
reservoir and the hose base with fresh
water and draining completely.
8. Place the water fill tank bank on the
water reservoir.
9. Reattach the telescopic pole and
hose.
10. Follow steps 3-6 of the quick storage
procedure above.
Troubleshooting
Problem Cause Solution
The
security
device
does not
work.
One of the
circuits has
fault, the
plug is loose,
the fuse
burned, the
LED of supply
source is
extinguished.
Check and
maintain by
specialized
technician
A noise
originates
pipe of
steam but
the
produced
steam is
weak.
The pipe is
twisted
below level to
iron.
Raise the
steam pipe
(residual
water in top
returns into
the device).
Spray
head is
The head is
broken, or
Replace the
spray head.
leaked the ironing is
vertical.
Move from
top down to
operate.
Hooking
connection
of steam
pipe is
leaked.
The cushion
can be
damaged
itself with the
aging, the
junction
interface
loosen itself.
Replace the
cushion.
Rotate the
junction of
steam pipe
tightly.
Water
spilled out
water tank
Water tank is
broken or has
a hole
Replace the
water tank
Steam is
weak
The power
source is
lower or
deposits can
obstruct the
arrival pipe.
Add a
stabilizer of
power
source. Use a
cleaning
respecting
the
environment.
No steam
but the
indicator is
lighted
The steam
creator is
broken.
The internal
electric
component is
broken.
Call a
specialized
technician to
do an
examination