Saturn ST-FP8055 - Инструкция (Страница 2)

2 3
GB
JUICER
Dear Buyer!
We congratulate you on having
bought the device under trade
name “Saturn”. We are sure that
our devices will become faithful
and reliable assistance in your
housekeeping.
Avoid extreme temperature
changes. Rapid temperature
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause
condensation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least 1.5
hours before switching it on.
If the unit has been in transit,
leave it indoors for at least 1.5
hours before starting operation.
Please, read all instructions
carefully before using.
Description
1. Pushing bar
2. Transparent cover
3. Juicing net
4. Middle ring
5. Handle
6. Residue barrel
7. Main machine
8. Juicer jug
Attention
1. This machine is unavailable for the
weakness, unresponsive or
psychopathic person (including
children), unless under the direction or
help from the person who have the
responsibility for security. Children
should be overseen, so it can be
testified that they are not playing with
it.
2. Before using, put this machine on a
stable and even table board, operate
according to the above methods.
3. Before juicing, first confirm juicing
net and rotor clutched in position, and
no hard contact between juicing net
cutter and transparent cover. Put the
transparent cover on, fasten tight the
handle, then turn on the machine.
4. Before being used, the motor works
in running-in phase, there may be
slight peculiar smell and spark, this is
normal, after the motor works for
some period, the above phenomenon
will disappear.
5. During juicing, make sure there is
not too full juice and residue in the
middle seat and residue cup, if too
full, please cut off power supply, clean
up, then use again.
6. During using, do not open the cup
cover. In case power supply is on, do
not put hand or any ware into the
mixing cup or feed port, otherwise,
harmful accident may occur or this
machine may be damaged.
7. In order to prolong service life of
this machine, over-temperature
protective device is mounted in the
motor. If the motor works for a long
time or overloaded, when over
warning temperature, power supply
will automatically cut off. After the
motor stops, pull out plug of power