Saturn ST-FP0053 - Инструкция (Страница 3)

4
¨ Never let the appliance run
unattended.
¨ This appliance is intended for
household use only.
¨ This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use
of the appliance by a person responsible
for their safety. Not recommended for
usage by children at the age of 14.
¨ Especially when operating the hand
blender attachment in hot liquids, do not
immerse the blender shaft into-or remove
it from the liquid while the appliance is
switched on.
¨ Children should be supervised to
ensure that they do not play with the
appliance.
¨ Do not touch the blades, especially
when the appliance is plugged in. The
blades are very sharp.
¨ If the blades get stuck, unplug the
appliance before you remove the
ingredients that block the blades.
¨ Always unplug the appliance when it
is left unattended and before you
assemble, disassemble, clean, store,
change accessories or approach parts that
move during use.
¨ Care should be taken when handling
the sharp cutting blades, emptying the
bowl and during cleaning.
¨ Service life – 2 years
Setting the speed
When activating switch, the processing
speed corresponds to the setting of the
variable speed regulator. The higher the
speed setting, the faster and finer the
chopping results will be.
For maximum processing speed, press the
turbo switch. You many also use the turbo
switch for instant powerful pulses without
having to manipulate the speed regulator.
How to operate your hand blender
The hand blender is intended for:
- blending liquids, e.g. dairy products,
sauces, fruit juices, soups, mixed drinks
and shakes.
- mixing soft ingredients, e.g.
- pureeing cooked ingredients, e.g. for
making baby food.
1. Attach the blender bar to the motor
unit (‘click’).
2. Immerse the blade guard
completely in the ingredients.
3. Pressing the normal or turbo speed
button to switch on the appliance.
4. Move the appliance slowly up and
down and in circles to blend the
ingredient.
When blending directly in the saucepan
while cooking, take the pan from the stove
first to protect the appliance from
overheating.
How to use you chopper
The chopper is intended for chopping
meat, cheese, onions, herbs, garlic,
carrots, walnuts, hazelnuts, almonds etc.
For chopping hard goods, use the turbo
switch.
Do not chop extremely hard food, such as
nutmeg, coffee beans and grains.
Before chopping
¨ Pre-cut meat, cheese, onions, garlic,
carrots, chillies.
¨ Remove stalks from herbs, un-shell
nuts
¨ Remove bones, tendons and gristle
from meat.
1. Place the blade on the centre pin of
the bowl and give it a turn to lock into
place.
2. Put the ingredients in the chopper
bowl.
3. Put the food processor lid onto the
chopper bowl. Turn the lid clockwise to
lock it.
4. Insert the motor unit into the
coupling unit until it locks.
5. Pressing the normal or turbo speed
button to switch the appliance.
6. After use, press release button to
remove the motor unit.
7. Turn the lid anti-clockwise to unlatch
it and lift it up.
8. Carefully take out the blade by
turning and pulling it, before removing the
processed food.
5
Mixing light dough
Using the chopper blade, you may also
mix light dough like a pancake batter or a
cake mixture based on up to 250g flour.
For a pancake batter, for instance, first
pour liquids into the bowl, then add flour
and finally eggs. Pressing the turbo
switch, mix the batter until smooth.
Slicing/shredding/grinder for potato
Use the slicing disc, you can slice
cucumbers, onions, mushrooms, apples,
carrots, radishes, raw potatoes,
courgettes, cabbage.
Using the shredding disc, you can shred
apples, carrots, raw potatoes, beetroot,
cabbage, cheese (soft to medium).
Use the grinder disc, you can grind potato.
1. Place the blade support on the centre
pin of the bowl, place
slicing/shredding/grinder disc into blade
support and give it a turn to lock into
place.
2. Attach the food processor lid onto the
bowl. Turn it clockwise to lock the lid.
3. Insert the motor unit into the coupling
unit until it locks.
4. Fill the food to be processed into the
filling tube. Never reach into the filling
tube when the appliance is switched on.
Always use the pusher to feed in food.
5. Pressing the normal or turbo speed
button to switch the appliance.
The pusher – tips and warning
Do not exert too much pressure on the
pusher when you press ingredients down
the feed tube.
There are two kinds of pusher (a small
one and a big one) for this appliance:
1. Use the big pusher to push big blocks
of ingredients into the processing cup.
2. For slim material (such as ham,
cucumber, carrot etc.), put the material
trough the hole of big pusher, use the
small pusher to push it. The small pusher
can be taken out of the big pusher by
turning it in an anti-clockwise direction.
3. Pre-cut large ingredients to make
them fit into the feed tube.
4. Fill the feed tube evenly for the best
results.
Whisk
The whisk is intended for whipping cream,
whisking egg whites, desserts etc.
1. Connect the whisk to the whisk
coupling unit.
2. Connect the coupling unit to the
motor unit.
3. Put the ingredients in a bowl (Use a
large and deep bowl for best result).
4. Immerse the whisk completely in the
ingredients. To avoid splashing, start
processing at normal speed.
Care and cleaning
¨ Unplug the appliance before cleaning.
¨ Clean the motor unit and the whisk
coupling unit with a damp cloth only. The
processor lid can be cleaned under
running water, but do not immerse it in
water, nor clean it in a dishwasher.
¨ All other parts can be cleaned in the
dishwasher.
¨ When processing foods with color
(e.g. carrots), the plastic parts of the
appliance may become discolored. Wipe
these parts with vegetable oil before
cleaning them.
Technical Data:
Power: 800 W
Rated Voltage: 220-230 V
Rated Frequency: 50 Hz
Rated Current: 3.63 А
Set
Blender 1
Chopping blade 1
Bowl (1750 ml) 1
Whisk 1
Measure cup (600 ml) 1
Disk 3
Instruction manual with
warranty book 1
Package 1
ENVIRONMENT FRIENDLY DISPOSAL
You can help protect the
environment!
Please remember to respect
the local regulations: hand in
the non-working electrical
equipment to an appropriate
waste disposal center.
The manufacturer
reserves the right to change the
specification and design of goods.