Инструкция по эксплуатации Saturn ST-EK0012

Страница 3

Advertising
background image

4

-

Never yank on the cord as this may

damage the cord and eventually cause a

risk of electric shock.

-

If the supply cord of this appliance

is damaged, it must only be replaced by

a

repair

shop

appointed

the

manufacturer, because special purpose

tools are required.

-

Avoid touching hot kettle surfaces-

use the handle and knobs.

-

To avoid possible steam damage,

turn the spout away from walls or

cabinets when operating the kettle.

-

If operated on wood furniture, use a

protective pad to prevent damage

delicate finishes.

-

To avoid scalding, always ensure the

lid is correctly positioned before

operating.

-

Scalding may occur if the lid is

removed whilst heating.

-

Remove and replace the lid carefully

when hot.

-

Extreme caution must be used when

moving the kettle containing hot water.

-

Never lift the kettle by its lid.

Always use the body handle.

-

Do not switch your kettle on if it

empty.

-

To protect from electrical hazard, do

not immerse this kettle, power base or

cord in any liquid.

-

Use the kettle only with the supplied

base unit. Do not use the base unit for

other purposes.

-

To protect against fire, do not

operate in the presence of explosive

and/or flammable fumes.

-

A kettle should not be left connected

to a wall socket when the room

temperature is likely to fall to outdoor

winter temperatures control thermostat

may reset to boil energize the element.

-

Do not use the kettle for any

purpose for any other uses than those

specified in this booklet.

-

Position the lid so that steam is

directed away from the handle.

-

Do not remove the lid while the

water is boiling.

INSTRUCTIONS FOR USE

Before first use, fill the kettle with

clean water to maximum capacity and

boil. Discard the water and repeat.

-

The kettle should always be

unplugged when filling or adding water.

-

Fill the kettle with water to the

desired level. Do not overfill or there will

be a risk of spillage or spitting. The

water level indicator will assist you to

measure correct amount. You can fill the

kettle via the spout or after opening the

lid. Do not forget to close the lid after

5

filling otherwise the kettle will not

automatically switch off after use.

-

Do not fill with less that 0.5 liter of

water.

-

Do not fill with more than 1.8 liter of

water (up to “MAX” indication).

-

An automatic safety cut-out has

been fitted for protection against

overheating. It will operate if the kettle

is

switched

on

when

containing

insufficient water.

-

If the automatic safety cut-out has

operated,

switch

the

kettle

off,

disconnect form the power outlet and

allow the kettle to cool down for 5-

10minutes.Then refill with water and

switch on-the kettle will then boil and

cut off as in normal operation.

-

The kettle may be switched off at

any time by either pushing the switch of

the kettle to the “up” position or by

switching the power off at the power

outlet.

-

To pour water, lift the kettle from the

power base and pour

CORDLESS KETTLE

-

Place the power base on a dry, flat

surface.

-

Place the kettle on the power base.

The electrical connections will be made

automatically as the kettle slides onto

the power base.

-

Plug the cord into an earthed power

socket and switch on by depressing the

switch of the kettle to the “down”

position.

-

When the water has boiled, the

kettle will switch off automatically. After

allowing the kettle to cool down for 30

seconds, the water can be brought back

to the boil by pushing the switch back to

the “down” position. During the cooling

down time do not force the on/off switch

into the “down” (“ON”) position as this

can damage the operating mechanism.

-

Do not remove the kettle from the

power-base without first switching off.

-

The kettle may be switched off at

any time by either pushing the switch of

the kettle to the “up” position or by

switching the power off at the power

outlet.

-

To pour water, lift the kettle from

the power base and pour.

HOW TO CARE FOR YOUR KETTLE

-

Wipe the exterior of the kettle with

a soft, damp cloth or sponge. Remove

stubborn spots with a cloth moistened

with mild liquid detergent. Do not use

abrasive scouring pads or powders.

Never immerse the kettle in water or

Advertising