DigiTech black-13 - Инструкция (Страница 13)

коммутация
Педаль Black-13™ включает в себя одно входное
гнездо (iNPUT) и два выходных (OUT 1 (AMP) и
OUT 2 (MiXeR)). Два выхода дают возможность
подключаться как к гитарному усилителю или
непосредственно к микшерному пульту, так и к
обоим устройствам сразу. выходное гнездо OUT 2
(MiXeR) позволяет в точности воспроизвести звучание
студийного усилителя Скотта без использования
отдельного усилителя.
(Ознакомьтесь с Диаграммой Коммутации на
следующей странице)
Connections
The Black-13 ™ pedal features a
single INPUT and a pair of
outputs, OUT 1 (AMP) and
OUT 2 (MIXER). The two
outputs give you the option of
running into a guitar amplifier,
running directly to a mixing
console, or both at the same time.
The OUT 2 (MIXER) output has
been specially designed to
faithfully reproduce Scott’s studio
guitar amplifier tones without
having to use an amp.
(Please refer to the Connections
Diagrams on the following
pages.)
Output Diagram Setup Directions
Follow these setup directions before use:
1.Turn the volume down on the amplifier/mixer you are connecting to.
2. Connect the pedal output to the amplifier and/or mixer input.
(Please refer to the Connections Diagrams on the following pages.)
3. Connect the guitar to the pedal input.
(Please refer to the Connections Diagrams on the following pages.)
4. Connect the power supply to the pedal.
(Please refer to the Connections Diagrams on the following pages.)
5. Set the pedal’s LEVEL control to the minimum position.
6.Turn up your amplifier/mixer level to your desired listening level.
7.Turn on the pedal by pressing the pedal switch and gradually turn up
the pedal’s LEVEL control to the desired listening level.