English – Инструкция по эксплуатации TIMBERK TAP FL100 MF
Страница 9
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
ENGLISH
6 - Mode Indicator manual installation SET;
7 - LED auto mode AUTO;
8 - LED timer Off after 1 hour;
9 - LED timer Off after 2 hours;
10 - LED timer Off after 4 hours;
11 - mode button;
12 - LED of the ionizer;
13 - LED of ultraviolet lamps;
14 - Power on-off ionizer and UV lamp;
15 - LED of low fan speed (minimum power);
16 - LED medium fan speed (average power);
17 - LED of high fan speed (maximum capacity);
18 - Button fan speed;
19 - Power on-off device.
COMPLETE SET
1. Air Purifier -1 pc.
2. Instruction Manual -1 pc.
3. Warranty Card -1 pc.
4. Packing -1 pc.
5. OPERATION OF THE INSTRUMENT
Operation of the instrument
Before switching on the device, open the compartment for the filters,
remove the filters, remove them from plastic bags and put in place in the
same manner (Fig.4).
Rg.4
Connect the equipment into an outlet. Click on-off unit, air cleaner will work.
Press the button again, the device turns off.
Manual mode the SET
With the mode button, select the manual installation SET (corresponding
indicator lights up). In this mode, the unit will run continuously until It Is
turned off by the user.
Automatic mode AUTO
With the mode button, select the automatic mode (the corresponding LED
lights up). In this mode, the device will work for 20 minutes and then off for
40 minutes.The cycle is repeated. To exit this mode you must select another
mode with the same button.
Air ionisation (ION) and the work of an ultraviolet lamp (UV)
By clicking on-off ionizer and UV light, you can select one of: the work of the
ionizer (the corresponding LED lights up), the work of an ultraviolet lamp
(lights up the corresponding LED), simultaneous operation of the ionizer
and UV light (both lightsare lit), turn offthe ionizer and an ultraviolet lamp.
Timer to switch offthe device (1H, 2H, 4H)
With the mode button, select the time after which the device will
automatically shut off: LED «1H» - shut off after 1 hour, indicator «2H» - off
after 2 hours, «4H» - shut-off after 4 hours. To exit the timer mode and
change to other modes, press the mode button.
The choice of power levels (LOW, MED, HIGH)
Air has three modes of power, to use the select button to switch the fan
speed; display "LOW" - a low fan speed (minimum capacity of the device),
the Indicator "MED" - the average fan speed (average power) Indicator Is
"HIGH" - high fan speed (the maximum capacity of the device).