Error displays/messages, 18 error displays/messages – Инструкция по эксплуатации Sony CDX-L490EE

Страница 18

Advertising
background image

18

Error displays/Messages

If these solutions do not help improve the
situation, consult your nearest Sony dealer.

Radio reception

Preset tuning is not possible.

• Store the correct frequency in the memory.
• The broadcast signal is too weak.

The stations cannot be received.
The sound is hampered by noises.

• Connect a power aerial control lead (blue) or

accessory power supply lead (red) to the
power supply lead of a car’s aerial booster
(only when your car has built-in FM/AM
aerial in the rear/side glass).

• Check the connection of the car aerial.
• The auto aerial will not go up.

t Check the connection of the power aerial

control lead.

• Check the frequency.

Automatic tuning is not possible.

• The local seek mode is set to “ON.”

t Set the local seek mode to “OFF” (page

11).

• The broadcast signal is too weak.

t Perform manual tuning.

The “ST” indication flashes.

• Tune in the frequency accurately.
• The broadcast signal is too weak.

t Set the monaural reception mode to

“ON” (page 11).

A programme broadcast in stereo is heard
in monaural.

The unit is in monaural reception mode.
t Cancel monaural reception mode (page

11).

Error displays

The following indications will flash for about 5
seconds, and an alarm sound will be heard.

ERROR

• A CD is dirty or inserted upside down.

t Clean or insert the CD correctly.

• A CD cannot play because of some problem.

t Insert another CD.

FAILURE

The connection of speakers/amplifiers is
incorrect.
t See the installation guide manual of this

model to check the connection.

HI TEMP

The ambient temperature is more than 50°C.
t Wait until the temperature goes down

below 50°C.

OFFSET

There may be an internal malfunction.
t Check the connection. If the error

indication remains on in the display,
consult your nearest Sony dealer.

RESET

The CD unit cannot be operated because of
some problem.
t Press the RESET button on the unit.

Messages

L.SEEK +/–

The Local Seek mode is on during automatic
tuning (page 11).

” or “

You have reached the beginning or the end of
the disc and you cannot go any further.

Advertising