Information for uk only, Warning - this appliance must be grounding, Important – Инструкция по эксплуатации Philips 170B7CS

Страница 23: Howto connect a plug, Information for, Uk only

Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".

Advertising
background image

Regulatory Information

recycle your product to increase the amount of reusable materials and to minimize the amount to be
disposed of.

Please find out about the local regulations on how to dispose of your old monitor from your local
Philips dealer.

(For customers in Canada and U.S.A.)
This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal
regulations.
Foradditional information on recycling contactwww.eia.org (Consumer Education Initiative)

RETURN TO TOP OF THE PAGE

Information for UK only

WARNING - THIS APPLIANCE MUST BE

GROUNDING.

Important:

This apparatus is supplied with an approved

moulded 13A plug. To change a fuse in this type
of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362 5A,A.
S.T.A. or BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket

outlets, it should be cut off and an appropriate 3-
pin plug fitted in its place.

If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.

Note: The severed plug must be destroyed to

avoid a possible shock hazard should it be
inserted into a 13A socket elsewhere.

Howto connect a plug

The wires in the mains lead are coloured in
accordance with the following code:

BLUE - "NEUTRAL" ("N")

BROWN - "LIVE" ("L")

GREEN & YELLOW - "GROUND" ("G")

file:///P|/P_TranslateFile/C9/2006/3/Help/AOC/032...70B7/Manual/RUSSIAN/170B7/safety/REGS/REGULAT.HTM (9 of 10)3/29/2006 3:09:52 PM

Advertising
Эта инструкция подходит к следующим моделям: