Инструкция по эксплуатации Flylink Full HD G-sensor Motion Detection
Страница 17
Set the time of screen off automatically, awake the LCD screen through pressing any button.
G-sensor
Used for monitoring crash condition while the car is running. Enforced saving function will be
triggered automatically if crash happens, and there will be a LOCK sign on the screen. The saved
file won’t be deleted by cycle recording. The sensitiveness option for G-sensor are
Cancel/1/2/3/4/5/6/7/8. Automatically saving function will be canceled when set as Cancel. About
impact strength, 1 is the lowest, 8 is the highest( to avoid affecting video recording because of the
small capacity TF card, size of the locked file is limited to 1G)
Manual File protection function
While recording, press MODE button to enforce to protect the current video. If in the status of
being protected, the protection fuction will be canceled when MODE button is pressed again. If in
the status of play-back, short press on POWER button to protect or relieve protecting the file.
GPS: to open or close the GPS function
Version number: to see version number of the machine
Remark:
1.
Resolution is 12M as default
2.
When connected with car by car charger, the machine will record automatically, and shut off
automatically if car is shut down.
3.
When power on and start up, GPS will automatically search the satellite. A red dynamic round
mark will appear on the lower-left corner of the LCD screen if not positioned. After GPS
positioned, the lower-left corner of the LCD screen will appear a green round mark.