Vitek VT-3782 - Инструкция (Страница 8)

playing to scan the disc at high speed. When the desired section of the disc is
found, release the button. Normal play will resume.
1. If you press and hold the FWD button (18) while playing, it will scan the curr
playing track forward at high speed.
2. If you press and hold the BACK button (19) while playing, it will scan the curr
playing track backward at high speed.
40 SECONDS ELECTRONIC SHOCK PROTECTION SYSTEM
The digital ELECTRONIC SHOCK PROTECTION function uses semiconductor
memory to prevent the sound from skipping when the unit is subjected to shocks
and vibration during play.
• While the “Anti Shock” button is pressed during play, the indicator appears in the
display and the digital ELECTRONIC SHOCK PROTECTION function turns on.
The digital datd equivalent to approximately 40 seconds of music is stored in a
“read ahead” memory buffer before it is decoded and played. The one mark
changes to the other mark, indicating that the data buffer is full.
• When the unit is subjected to a shock during play, the data stored in memory
continues to be decoded and played. This gives the pickup time to stabilize and
continue reading new data. As the data is read from memory the indicator
changes.
• Once the pickup returns to its original position, new data is stored in memory and
the display changes back to the other mark.
Press the “Anti Shock” button to turn the digital Electronic Shock Protection
function off.
NOTE: Keep the digital electronic shock protection function off when using the unit
in a stable location where it will not be subjected to shocks. The battery power con
sumption is reduced when the electronic shock protection function is turned off.
NOTE: When the digital electronic shock protection function is switched on or off,
the sound wil be interrupted for 1 to 2 seconds.
VARIOUS PLAYING MODES
PROGRAMMED PLAY
The tracks on the disc can be programmed for playing in any order. (Up to 20
tracks can be programmed.)
• During programming, "PROG" flashes in the display.
Program Number 1 2 3
Track number 3 5 6
1 Press the PROGRAM button (4) during playing or in stop mode, " PROG " and
ENGLISH
8
ПОВТОР ОДНОЙ ДОРОЖКИ
1. Нажмите кнопку P MODE (8) один раз , загорится индикатор повторного
воспроизведения “REPEAT 1”.
2. Нажимайте кнопки SKIP/SEARCH #/$ , пока номер нужной дорожки не
высветится на дисплее.
3. Дорожка будет воспроизводиться непрерывно до тех пор, пока Вы не
нажмете кнопку STOP (16).
ПОВТОР ВСЕХ ДОРОЖЕК
1. Нажмите кнопку P MODE (8) дважды, загорится индикатор повторного
воспроизведения “REPEAT ALL”.
2. Нажмите кнопку "PLAY/PAUSE" (10). Дорожки будут воспроизводится
непрерывно до тех пор, пока Вы не нажмете кнопку STOP (16).
ПРОИГРЫВАНИЕ В РЕЖИМЕ “INTRO”
1. Нажмите кнопку P MODE (8) три раза, загорится индикатор “INTRO”.
2. Нажмите на кнопку "PLAY/PAUSE" для проигрывания первых 10 секунд
каждой дорожки.
ВОСПРОИЗВЕДЕНИЕ ДОРОЖЕК В ПРОИЗВОЛЬНОМ ПОРЯДКЕ
Дорожки диска могут воспроизводиться в произвольном порядке (выбор
последовательности проигрыватель осуществляет самостоятельно). Для
этого нажмите кнопку P MODE (8) четыре раза, а затем кнопку
"PLAY/PAUSE" .
РУССКИЙ
21
3782.qxd 02.07.03 15:38 Page 16