Vacuum cleaner assembling, Fitting flexible hose, Fitting telescopic tube and accessories – Инструкция по эксплуатации Hyundai H-VC1590

Страница 3: Instruction for use

Advertising
background image

3

· Do not make attempts to repair the appliance, adjust or replace parts in the vacuum cleaner. When malfunctions happen, contact the authorized service

center for examination, repair, electrical or mechanical adjustment.

· Do not let the cord hang over edges or touch hot surfaces.

· Before you start using the vacuum cleaner, please remove large or sharp objects from the floor in order to prevent the damage of the filter or the dust bin.
CAUTION: Never use the vacuum cleaner without the filters.

Vacuum cleaner assembling

Always remove the plug from the power supply before fitting or removing accessories.
Fitting flexible hose

· Join hose and cleaner by means of joining hose and suction. Insert the hose into the suction and turn it clockwise.

Hose removing

· To remove flexible hose from the vacuum cleaner, push the button on it and pull to remove it from the attachment point.
Fitting telescopic tube and accessories

Extend the telescopic tube to the desired length by pressing the extension pipe button. Pull the cord to corresponding length, and insert the power plug. The

yellow mark on the cord indicates the ideal cord length; never pull the cord beyond the red mark.

· Insert a flexible hose into a telescopic tube: directly cover the metal tube two part over the bend, adjust the suction force through adjusting the air flowing

volume of the cleaner by sliding the regulating button on the bend handle.

· Fit a nozzle to telescopic tube:
- Universal floor brush is intended for cleaning bare floor and floor coverings;
- Crevice nozzle is for cleaning corners and between cushions
- Furniture/ sofa brush is for cleaning sofa, curtain or dust on the decorating surfaces.
-decrease power for cleaning curtains, books, furniture, etc.

-increase power for cleaning bare floor.

Instruction for use

Before using the appliance, unwind a sufficient length of cord and insert the plug into the power supply. The mark on the cord shows the ideal cord length.
Do not expand the cord beyond the red mark.

· Insert the power plug;
· Press down the switch button of the cleaner, keep it ON ; make the suction power stronger by turning it clockwise and make weaker by turning it

anticlockwise. Power fixed cleaner is without power control. To stop it press the On/Off button again.

· You can adjust the vacuum cleaner power using the power control on handle.

-

decrease power for cleaning curtains, books, furniture, etc.

Advertising