Warranty and manufacturer identification – Инструкция по эксплуатации Kastor SAGA Wood-burning sauna stoves

Страница 34

Advertising
background image

34 / 51

See chapter 3.2. about draught adjustment.

Is the stove too big for the sauna?
Is the draught height (chimney height) sufficient with regard to the environment?

Nearby trees, a steep hill etc. requires more than 3.5. meters as measured from the
chimney floor.

Correct amount of stones?

The stones should reach up to the edge of the stone compartment at the edges and be
heaped up only by half a stone in the middle.

Are the stones packed too tight?

The stones need to be stacked in such a way that there is enough air between them. See
chapter 2.2.

Are the stones good quality and the correct size?

Suitable stones are peridotite or dunite of a length of over 10 cm and not too flat.

The sauna heats up quickly, but the stones remain cool.

Correct amount of stones?
Are the stones packed too tight?

The stones need to be stacked in such a way that there is enough air between them. See
chapter 2.2.

Is the stove too big for the sauna?

Keep the ventilation valve open to remove excess heat, which gives the stones time to
warm up as well. This will extend the heating period slightly.

Are you heating the sauna correctly?

Read chapter 3 of these instructions carefully.

Black flakes collect beneath the stove.

The stones may be weathered.

The flakes may be metal flaking off the stove. The stove has been heated too intensely at a red
heat.

The metal flakes off and the stove will break down prematurely.

There is a smell of sulphur in the sauna.

Traces of sulphur have remained on the stones from the quarry’s explosion or the stones
are naturally sulphurous.

6. Warranty and manufacturer identification

If the stove stands unused in a moist environment (such as a cold holiday cottage), it must be inspected for
any corrosion damage before use.

WARRANTY
Helo products are of high quality and reliable. For its wood burning stoves, Helo Oy grants a 1 year
warranty covering manufacturing flaws.
This warranty does not cover any damage incurred through incorrect use that does not accord with
instructions. See chapter 3 of this manual.


MANUFACTURER
HELO OY,

Tehtaankatu 5 - 7, 11710 Riihimäki, Finland

Tel. +358 207 560300, e-mail: [email protected]

www.Helo.fi

Advertising