Binatone Oval Twin XD1220 - Инструкция (Страница 20)

20
3. Press the [6] button repeatedly until the LCD [2] shows: “RECALL”.
4. Press the OK button [7], the LCD [2] will show: “RECALL: X” (X = disconnect timeout
settings, 1 to 5: 1=80 ms, 2=100ms, 3=180 ms, 4=300 ms, 5=600 ms).
5. Using the [5] or [6] buttons, choose the appropriate disconnect timeout setting.
6. Press the OK button [7] to confirm your selection and go to the previous menu item.
7. Press and hold the CANCEL button [9] to exit this menu item.
Changing the pause duration
1. Press the OK button [7], the LCD [2] will show: “PHONE BOOK”.
2. Press the [6] button repeatedly until the LCD [2] shows: “BASE”.
3. Press the OK button [7].
4. Press the [6] button repeatedly until the LCD [2] shows: “PAUSE”.
5. Press the OK button [7], the LCD [2] will show: “PAUSE: X” (X = pause duration
settings, 1 to 5: 1=1 s, 2=1.5 s, 3=2 s, 4=3 s).
6. Using the [5] or [6] buttons, choose the appropriate pause duration setting.
7. Press the OK button [7] to confirm your selection and go to the previous menu item.
8. Press and hold the CANCEL button [9] to exit this menu item.
Dialing mode
1. Press the OK button [7], the LCD [2] will show: “PHONE BOOK”.
2. Press the [6] button repeatedly until the LCD [2] shows: “BASE”.
3. Press the OK button [7].
4. Press the [6] button repeatedly until the LCD [2] shows: “DIAL MODE”.
5. Press the OK button [7], the LCD [2] will show: “TONE”.
6. Using the [5] or [6] buttons, choose the appropriate dialing mode, “TONE” or
“PULSE”.
7. Press the OK button [7] to confirm your selection and go to the previous menu item.
8. Press and hold the CANCEL button [9] to exit this menu item.
Keypad lock
You can lock the handset keypad to prevent the accidental button pressing. It can be
convenient if little children have access to the handset. When the keypad is locked, only the
OK button [7] is functional. You can also answer the incoming call by pressing the CALL
button [4]. During conversation, the lock is disabled, after hanging up it is enabled again.
Locking the keypad
1. Press the OK button [7].
2. Press the “*” button [11].
3. The LCD will display the “keypad locked” icon.
Disabling the keypad lock
1. Press the OK button [7].
2. Press the “*” button [11].
3. The “keypad locked” icon will disappear from the LCD.