English русский – Инструкция по эксплуатации Vitek VT-3462

Страница 7

Advertising
background image

3. Нажмите кнопку SKIP/SEARCH %/& (16,19), чтобы выбрать нужную дорожку.

Дисплей высветит ее номер.

4. Нажмите кнопку PROGRAM (21) еще раз.

5. Повторите шаги 3 4 для программирования других дорожек.

6. Для начала запрограммированного воспроизведения нажмите на клавишу

PLAY/PAUSE$/#(18), при этом на дисплее появится индикатор воспроизведения
(27) и программирования (34). По окончании воспроизведения последней дорожки
сработает режим остановки.

7. Для отмены запрограммированного воспроизведения нажмите кнопку

“STOP”!(17) дважды или просто откройте отсек для компакт диска.

ПОИСК ЖЕЛАЕМОГО ТРЕКА

Нажмите и удерживайте кнопки SKIP/SEARCH %/& (16,19), пока не найдете нужную
дорожку или нужный момент записи.

МАГНИТОФОН

ВОСПРОИЗВЕДЕНИЕ КАССЕТЫ

1. Установите функциональный переключатель (6) в положение TAPE.

2. Нажмите кнопку STOP/EJECT!(8), чтобы открыть крышку кассетоприемника.
3. Вставьте кассету с записью в деку и закройте крышку.

4. Для воспроизведения нажмите кнопку PLAY$(12).

5. Чтобы остановить воспроизведение, нажмите клавишу STOP/EJECT!(8).

6. Чтобы перемотать ленту вперед, нажмите кнопку F.FWD((9).

7. Чтобы перемотать ленту назад, нажмите кнопку REW )(11).

8. Чтобы временно остановить воспроизведение, нажмите кнопку PAUSE#(7).

ЗАПИСЬ С РАДИОПРИЕМНИКА
Следуйте инструкциям из раздела "РАДИОПРИЕМНИК"; убедитесь, что прием

радиосигнала устойчивый и без помех.

Вставьте кассету в деку.
Нажмите на клавиши "RECORD"*(13) и “PLAY”$(12) .
Вы можете отрегулировать звучание, не опасаясь испортить качество записи.
Для остановки записи используйте кнопку “STOP/EJECT”!/"(8), для временного

прекращения записи нажмите кнопку “PAUSE”#(7) .

ЗАПИСЬ С КОМПАКТ ДИСКА
Установите функциональный переключатель (6) в положение "CD". Выберите

желаемую дорожку и отрегулируйте уровень громкости.

Вставьте кассету в деку.
Нажмите на клавиши "RECORD"*(13) и “PLAY”$(12) на деке.
Нажмите на клавишу "PLAY/PAUSE"$/#(18) на CD.

14

LOADING A DISC
1. Slide the FUNCTION switch (6) to the CD position.
2. Open the CD DOOR (22).
3. Insert a disc with the label side facing upward (if the disc is upside down, the DISPLAY will show 2
zeros).
4. Close the CD DOOR (22) by hand.
5. This DISPLAY will show 2 dashes flashing and then the total number of tracks on the disc.
6. To start playing, press the CD PLAY/PAUSE ($#) button (18). Track number 1 will be shown in the dis
play and after a few seconds the track will begin to play.
7. Adjust the VOLUME CONTROL (5) to the desired volume level.
8. To stop playing, press CD STOP (!) button (17). To shut power off, please press the Power ON/OFF
Button (2).
Note: Never touch the laser lens inside the CD compartment. If it ever gets dirty, clean it with a CD clean
er disc.

REMOVING A DISC
1. Make sure the CD is not playing. If it is, press the CD STOP (!) Button (17).
2. Open the CD Door (22).
3. Gently remove the disc.
4. Close the CD Door (22) by hand.
5. Store the disc in its protective storage box.

PLAYING A COMPACT DISC
NORMAL PLAY
1. Set the FUNCTION switch (6) to the CD position, if a disc is already loaded into the CD compartment,
after approximately 5 seconds the total number of tracks will be shown in the display.
2. To start playing, press the CD PLAY/PAUSE ($#) button (PLAY/PAUSE indicator (27) will light). Track
number 1 will be shown in the display and after a few seconds the track will begin to play.
3. Adjust the VOLUME control (5) to the desired volume level.
4. To stop the disc temporarily, press the CD PLAY/PAUSE ($#) button (18), the PLAY/PAUSE indicator
(27) will flash. To resume play press the CD PLAY/PAUSE ($#) button (18) again, the PLAY/PAUSE indi
cator (27) will stop flashing and play will commence.
5. To stop the disc, press the CD STOP (!) button (17), and PLAY/PAUSE indicator (27) will go off.
6. To turn off the CD, slide the FUNCTION switch (6) to TAPE or RADIO position.
Note:
Never press the CD Door (22) down during play, this may cause malfunction or damage the disc. Always

stop the CD player by using the CD STOP (!) button (17) before you take the disc out of the compart
ment.

If you hit or move the CD during play, the music will stop for a second or two and then start again. This

is the normal operation for portable CD players.

SKIPPING TRACKS (SKIP)
1. This function enables you to find the beginning of any desired track during playback. If the CD FOR
WARD SKIP (&) button (19) is pressed once or repeatedly, the NEXT TRACK or one of the following tracks
will be selected. The Display will show the track or song number.
2. If the CD BACK SKIP (%) button (16) is pressed twice or more in rapid succession, play will go BACK
one track per press (In PLAY mode, pressing the button once will go back to the beginning of the track
being played).
3. When the set is in the PAUSE mode, it is also possible to select the beginning of a certain track by using
the CD FORWARD SKIP (&) button (19) and CD BACK SKIP (%) button (16) to reach the desired track.
After selection, press CD PLAY/PAUSE ($#) button (18) to resume play.
4. Press and hold the CD FORWARD SKIP (&) button (19) to search forward at a high speed for a partic
ular point. Press and hold the CD BACK SKIP (%) button (16) to search backward. Release the button to
resume normal play when the point is found.

7

ENGLISH

РУССКИЙ

VT-3462.qxd 29.01.03 16:01 Page 14

Advertising