Your new appliance, Accessories, Code – Инструкция по эксплуатации Neff T62R36S1

Страница 5: Gas burners, Switching on a burner, Operating and residual heat indicator

Advertising
background image

5

Your new appliance

Page 2 shows an overall view of your new appliance as well as

the burner power.

Accessories

The following accessories can be purchased from the

Technical Assistance Service:

--------

Code

The manufacturer accepts no liability if these accessories are

not used or are used incorrectly.

Gas burners

There are indications to show which burner each control knob

operates.

It is essential to ensure that all the burner parts and pan

supports are correctly installed for the appliance to work

correctly. Do not swap the burner caps around.

Switching on a burner

Press and turn the desired burner control knob anticlockwise to

the required position. The flame will ignite automatically and the

hotplate indicator light will come on after a few seconds.
If the burner does not switch on, wait at least a minute until

trying again.

Operating and residual heat indicator

All the hotplates have an operating and residual heat indicator

which comes on when the flame on the corresponding hotplate

is lit.
Once the hotplate is switched off, the residual heat indicator

remains on indicating that the hotplate temperature is too high.

Do not touch the hotplate while the indicator light is on.
After a while the residual heat indicator will go off, indicating

that the temperature of the hotplate has dropped and is no

longer too high. Care must then be taken when touching the

appliance to avoid burns, since the hotplate may not have

completely cooled down.

Additional wok pan support
Only for use on wok burners

with pans with a round base.
The additional wok pan sup-

port should be used to pro-

long the appliance's useful

life.

Additional coffee maker sup-

port
Only for use on the auxiliary

burner with pans which are no

more than 12 cm in diameter.

Simmer Plate
This accessory has been

designed to reduce the level

of heat at the lowest power

setting.
Place the accessory directly

on the pan support with the

cones facing upwards, never

directly over the burner. Cen-

tre the pan over the acces-

sory.

Z2472X0

Additional wok pan support: cast iron (3.3 kW)

Z2471X0

Additional wok pan support: cast iron (4 kW)

Z2402X0

Additional coffee maker support

Z2480X0

Simmer Plate

Advertising
Эта инструкция подходит к следующим моделям: