Sven SPS-860 - Инструкция (Страница 17)

6. SYSTEM OPERATION
First make sure that all connections are right and then turn on the system.
Power on and off
Insert the power plug of this device into the socket of ~220V power supply, and press the power switch downwards to switch on the
device. Then, the VFD display lights, and press the power switch again to switch off the power supply.
Selection of input signal source
AS has 4 inputs: Tuner stereo input (Tuner), TV stereo input (TV), additional stereo input (AUX) and 5.1 channel input (5.1 CH). Select
required sound source with C key on the front panel or with C F keys on Remote Control. Press C key on front panel several times
to select required sound source.
5.1 VS mode and EQ
5.1 VS mode operates at stereo signal input. Press F key on front panel or G kbutton on Remote control to activate 5.1 VS. Indicator
O flashes on front panel. Press G key to on front panel or H K buttons on Remote Control to choose EQ modes.
Speakers volume adjustment.
Select necessary channel with L P keys on Remote control then press R or S to adjust the sound volume. General sound volume
can be adjusted with D and E keys on sunwoofer front panel and R, S keys on Remote Control.
Timbre adjusting
1. Bass adjustment: Press V button on the remote control then press button W/X to adjust the timbre level.
2. Tone adjustment: Press U button on the remote control then press button W/X to adjust the timbre level.
Standby condition
If not using this unit for a period of time, you can press the standby button and the STANDBY indicator on panel will light. Press the
STANDBY button once again to make this unit enter the normal operation status, at the same time, the STANDBY indicator is OFF. But
if you are not using this unit for a long time, it is best to switch off the power supply of the whole unit, and cut down the power supply.
Muting
Sound can be off with 2 key on remote control, at this time on front panel J indicator flashes. Press this key again, indicator will go
dark and sound will be restored.
In case of malfunction, please power off the system immediately and check the unit according to following table. If the problem still
exists, please contact the dealer or the manufacturer.
17
Eng SVEN SPS 860