Инструкция по эксплуатации Sven SPS-910

Страница 10

Advertising
background image

1. SAFETY PRECAUTIONS

Do not allow AS wire connecting (including grounded ones), AS wire and amplifier package connecting, AS wire connecting to

ground, as this may cause amplifier output stages damage.

Never push objects of any kind (needles, hair pins, coins, insects) into this system.
Do not put the system in damp circumstances, prevent from ingress of moisture and dust. (Do not place flower vases and other

objects on the system).

Prevent AS from heating. (Do not install AS near heat sources and prevent it from direct sunlight).
Do not use petrol, alcohol and other solvents when cleaning, as they may damage stained surface. Clean only with dry soft cloth.
Do not open AS.
If AS do not operate, unplug it and refer to service personnel.

2. PACKING INCLUDING

1. Wooden cabinet for sub woofer – 1 pc
2. Plastic cabinet for woofer – 2 pcs
3. Link cable – 2 pcs
4. Signal input cable – 1 pcs
5. Remote control– 1 pc
6. Operation manual – 1 pc

3. AS FEATURES

Built in OCL amplifier, circuit designed for sub woofer and stereo channels output
Stereo channels intput, 3D function
Remote control
Completely magnetically shielded, can be put together with PC monitor, TV without any interaction
Independent volume control knobs for sub woofer and front speakers respectively

4. LOCATING

Place the speakers symmetrically to the listeners to the distance not less then one meter.
Place subwoofer in any convenient place even under desktop.
Place AS far away from TV sets as picture distortion in supersensitive monitors and TV sets is possible.

5. INSTALLATION AND OPERATION GUIDE

1. Connect the subwoofer and speakers with link cables (See fig. 1).
2. Insert one end of the signal input cable into the output port of audio (video) player (DVD, CD/VCD, TV, TAPE), then connect anoth
er end with input port at the back of the subwoofer according to the red and the white cable respectively.
3. Plug into power connector for power and press POWER botton (See fig. 2).
4. Press button «3D» to select the 3D sound mode.
5. Adjust the VOLUME buttons for your satisfied speakers volume effect.
6. Adjust the BASS buttons for your satisfied subwoofer effect.

6. SPECIFICATION

10

OPERATION MANUAL

Output power (RMS):

subwoofer
woofer

15 W
2 х 5 W

Speaker unit:

subwoofer
woofer

3.5"
2 x 2.5" (full range)

Power supply

220 V AC, 50 Hz

Frequency response:

subwoofer
woofer

45–160 Hz
220–16 000 Hz

Dimension:

subwoofer
woofer

L 150 x D 250 x H 200 mm
L 80 x D 225 x H 80 mm

Weight

3.9 kg

Advertising