Cleaningtheshaver, Readinglampswhenusing – Инструкция по эксплуатации Panasonic ES-LV65
Страница 11
11
English
►Notes
• If you press the power switch for more than 2 seconds, the sonic
vibration cleaning mode is activated. (See this page.)
You cannot shave in this mode.
• Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to switch the mode or turn off.
Place your fingers on the finger rest while using the shaver.
• We recommend using the shaver in an ambient temperature
range of 5 – 35 °C. If used outside this range, the appliance may
stop operating.
Readinglampswhenusing
During use
After use
The used time and remaining
battery capacity are shown and
then turn off after 5 seconds.
• The shown time returns to
[0’00”] after 10 minutes.
The lamps will light up and
then turn off after 8 seconds.
When the battery capacity is low
“10%” appears and “ ” blinks.
• You can shave 1 to 2 times after “10%” appears. (This will differ
depending on usage.)
• A full charge will supply enough power for approx. 14 shaves of 3
minutes each. (This will differ depending on usage.)
Cleaningtheshaver
We recommend that you clean your shaver with the sonic vibration
cleaning mode when the faucet symbol appears on the lamp
display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring to unlock the
power switch.
4. Press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section and
press the power switch for more than 2
seconds to activate the sonic vibration
cleaning mode and clean it with
running water.
6. Wipe off any drops of water with a dry
cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
9. Lubricate the shaver.
4
5
7