Vitek VT-1202 - Инструкция (Страница 5)

4. When the required temperature is reached; pilot light goes
off. The iron is ready for use.
5. Move the Temperature Dial in anti clockwise direction to
'Min'; the iron is switched off.
6. Disconnect the iron from mains supply outlet.
7. When the iron gets cool completely, store it vertically in a
safe place.
CLEANING THE IRON
1. Disconnect the iron from the mains supply outlet.
2. Use a damped cloth or non scratching cleaner to remove
any deposits on the sole plate or the cabinets.
Note:
1. Never use sharp or rough objects to remove the deposits on
the sole plate.
2. Never use any abrasive, vinegar or descaling agents to
clean the iron.
CLEANING THE IRON
1. Disconnect the iron from the mains supply outlet.
2. Use a damped cloth or non scratching cleaner to remove any
deposits on the sole plate or the cabinets.
3. Never use sharp or rough objects to remove the deposits on
the sole plate.
4. Never use any abrasive, vinegar or descaling agents to clean
the iron.
SPECIFICATION
Power requirement
230 V ~ 50 Hz
Max. power 1100 W
SERVICE LIFE OF THE IRON NOT LESS THAN 3 YEARS
ENGLISH
5
РУССКИЙ
На ярлыке означает: изделие нельзя гладить!
(например, эластик)
Примечание:
вид ткани
синтетика
синтетика
ацетатволокно
триацетат
с люрексом
полиамид
(нейлон)
полиэстер
вискоза
шелк
шерсть шерсть
хлопок хлопок
лен лен
синтетика
акрил
полипропилен
полиэтан
волокно
позиция
терморегулятора ярлык
шелк
12
1202.qxd 03.07.03 16:47 Page 10