Инструкция по эксплуатации Bork IR CWV 3117 GY
Страница 19
19
Instruction manual
Eng
Turn the variable steam button (5) to position “
“. Hot water and
steam will be emitted from the soleplate. Swing the steam iron
lightly to and fro to allow lime and dust particles to come out.
When the water reservoir is empty, release the self-cleaning button
and let it goes down completely.
Stand the steam iron upright and insert the plug into the wall
socket to let the steam iron heat up again.
Move the steam iron over a clean cotton cloth to clean the soleplate
and let remaining water on the plate evaporate.
Cleaning
Before cleaning remove the mains plug from the wall socket and
allow the iron to cool down sufficiently.
Scale and other residue can be wiped off the soleplate with a damp
cloth and some non-scratching (fluid) abrasive.
From time to time clean the inside of the water reservoir filling with
water and shaking. Then pour the water out.
The self-cleaning system should be used at least once a month.
Storage
Remove the mains plug from the wall socket.
Pour any remaining water out of the water reservoir.
Set the steam knob to no steam position.
Stand the iron upright and let it cools down sufficiently.