Sony DCR-TRV125E - Инструкция (Страница 79)

79
Customizing Your Camcorder
Выполнение индивидуальных установок на видеокамере
Changing the menu settings
Icon/item
LCD B. L.
LCD COLOUR
VF B.L.*
CONTINUOUS*
QUALITY*
FLD./FRAME*
PRINT MARK*
PROTECT*
SLIDE SHOW*
DELETE ALL*
FORMAT*
PHOTO SAVE*
Mode
z
BRT NORMAL
BRIGHT
z BRT NORMAL
BRIGHT
z OFF
MULTI SCRN
z FINE
STANDARD
z FIELD
FRAME
z OFF
ON
z OFF
ON
z RETURN
FORMAT
Meaning
To set the brightness on the LCD screen normal
To brighten the LCD screen
To adjust the colour on the LCD screen, turning the
SEL/PUSH dial to adjust the following bar.
To set the brightness in the viewfinder normal
To brighten the viewfinder
Not to record continuously
To record 9 images continuously (p. 97)
To record still images in the fine image quality mode,
using the “Memory Stick”
To record still images in the standard image quality
mode, using the “Memory Stick”
To record moving subjects
To record stopping subjects in high quality
To cancel print marks on still images.
To write a print mark on the recorded still images
you want to print out later
Not to protect still images
To protect selected still iamges against accidental
erasure (p. 116)
To play back images in a continuous loop (p. 114)
To delete all the images (p. 119)
To cancel formatting.
To format an inserted “Memory Stick.”
1. Select FORMAT with the SEL/PUSH EXEC dial,
then press the dial.
2. Turn the SEL/PUSH EXEC dial to select FORMAT,
then press the dial.
3. After “EXECUTE” appears, press the SEL/PUSH
EXEC dial. “FORMATTING” appears during
formatting. “COMPLETE” appears when formatting
is finished.
To duplicate still images (p. 107)
POWER
switch
PLAYER
CAMERA
MEMORY
MEMORY
PLAYER
MEMORY
MEMORY
PLAYER
MEMORY
PLAYER
MEMORY
MEMORY
PLAYER
MEMORY
PLAYER
MEMORY
PLAYER
* DCR-TRV320E only
Notes on LCD B.L. and VF.B.L.
•When you select BRIGHT, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, BRIGHT is automatically selected.
Notes on formatting
•Supplied or optional “Memory Stick”s have been formatted at factory. Formatting with this
camcorder is not required.
•Do not turn the POWER switch or press any button while the display shows FORMATTING.
•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is set to LOCK.
•Format again if the message “
” appears.
Formatting erases all information on the “Memory Stick”
Check the contents of the “Memory Stick” before formatting.
•Formatting erases sample images on the “Memory Stick”.
•Formatting erases the protected image data on the “Memory Stick.”
PLAYER
CAMERA
MEMORY
To lighten To darken
PLAYER
CAMERA
MEMORY