LG GA-B489BVCA - Инструкция (Страница 50)

. (If you
50
CARE AND MAINTENANCE
To Reverse the Doors Lamp Replacement
(For bulb lamp applied model only)
• The appliance is designed with reversible
doors so that they can open both on the
right and left sides to suit your kitchen
design.
However, when you want to reverse the
doors, you must call to service agent.
Reversing the doors is not covered by the
warranty.
Refrigerator work features
1. Unplug the power cort from the outlet.
2. Remove the room lamp lid by
taking down while
pulling its back
projection.
3. Remove the lamp by turning it
counterclockwise and replace new one.
4. Assemble in reverse order of
disassembly. Replacement bulb must be
original. the same specification as
Lamp capacity is MAX 30W.
The lamp will remain “ON” for 7 minutes if
the door is left open and then it is “OFF”
reopen the door, the for safety
lamp is “On”).
You must check the O-RING, which is
made by rubber and prevent electric
Don’t touch the lamp, in case of
long time. Because it can
NOTE
spark.
light on the
be very hot.
As a result of thermal strain for components of
a refrigerator appliance can be heard crackling
noise that is not a defect and doesn’t affect
efficiency of the appliance. This special sound
when the thermo-regulator and compressor and
turned on is a normal state, which appears
during the working process of appliance’s
electric installation.
The gas refrigerant produces a slight noise even
when the compressor is not running (this is not
a defect.)
While refrigerator appliance working process
can be heard:
- flick of the temperature relay;
- murmur of refrigerant flowing round cycle;
- cracking noise because of the materials
deformation by temperature.
All that is not defect and doesn’t affect efficiency
of the appliance.
CAUTION!
CAUTION!
CAUTION!