Hints and tips, Starting a programme with delay start, Opening the door while the appliance operates – Инструкция по эксплуатации Electrolux ESI6601ROX

Страница 13: Cancelling the programme, At the end of the programme, 1 the water softener

Advertising
background image

2. Press the on/off button to activate the

appliance. Make sure that the appli-
ance is in setting mode.

3. To set a programme, keep the appli-

ance door ajar.

4. Set a programme. Press Program

again and again until the indicator of
the programme you want to set
comes on. You can also set the appli-
cable options.
• If you want to set the MyFavourite

programme, press and hold Pro-
gram
until the indicators that are re-
lated to the MyFavourite programme
and options come on.

The display shows the duration of the
programme.

5. Close the appliance door to start the

programme.
• The washing phase indicator comes

on.

• The programme duration starts to

decrease with steps of 1 minute.

Starting a programme with delay
start

1. Set the programme.
2. Press Delay again and again until the

display shows the delay time you want
to set (from 1 to 24 hours). The Delay
indicator comes on.
• The countdown starts automatically.

When the countdown is completed, the
programme starts.

Opening the door while the
appliance operates

If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.

Cancelling the delay start while
the countdown operates

When you cancel the delay start you have
to set the programme and options again.
Press and hold, at the same time, Pro-
gram
and TimeSaver until the indicator
and the duration of the programme ECO
come on.

Cancelling the programme

Press and hold, at the same time, Pro-
gram
and TimeSaver until the indicator
and the duration of the programme ECO
come on.

Make sure that there is detergent
in the detergent dispenser before
you start a new programme.

At the end of the programme

The display shows 0:00.
All the segments of the programme bar
are on with fixed light.
1. Press the on/off button or wait for the

Auto Off function to automatically de-
activate the appliance.

2. Close the water tap.

Important
• Let the dishes become cold before you

remove them from the appliance. Hot
dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and on

the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.

8. HINTS AND TIPS

8.1 The water softener

Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.

The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dish-
washer salt and water.

ENGLISH

13

Advertising