Electrolux ESF6200LOW - Инструкция (Страница 13)

A1
A2
2. To disassemble the filter (A), pull
apart (A1) and (A2).
3. Remove the filter (B).
4. Wash the filters with water.
5. Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Make sure that the filter (B) is cor-
rectly positioned under the 2 guides
(C).
7. Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
8.2 Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
8.3 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
9. TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution
to the problem. With some problems, the end indica-
tor flashes intermittently to show an
alarm code.
Alarm code Problem
• The end indicator flashes 1 time in-
termittently.
• Start indicator flashes continuously.
The appliance does not fill with water.
• The end indicator flashes 2 times in-
termittently.
• Start indicator flashes continuously.
The appliance does not drain the water.
• The end indicator flashes 3 times in-
termittently.
• Start indicator flashes continuously.
The anti-flood device is on.
ENGLISH 13