Beko WMD 25080 R - Инструкция (Страница 16)

16
is completed “Ready” led will be on again.
During machine operation you can press “Start/Pause/
Cancel” key for getting machine to “Pause” position. In this
case “Start/Pause/Cancel” led will blink.
Changing Program
You can use this feature for washing laundry in the same
textile group for washing at lower or higher temperatures.
For example, instead of Cotton60, Cotton40 can be used.
For selecting Cotton40 instead of Cotton60 by pressing
“Start/Pause/Cancel” key machine is switched to pause
position. Program knob is turned for selecting Cotton40
program.
Even when the program selection button is changed during
the program initially selected program will be executed. For
changing washing program continuing program must be
cancelled. (See Cancelling a program)
For selecting auxillary functions or spin speed necessary
changes can be performed after pressing Start/Pause/
Cancel button. Although selected auxillary functions must
be compatible with washing program. For example when
your machine is intensive program you can select additional
rinse plus function but you can not select express.
Adding laundry
If you want to add laundry to your machine after program
begins press Start/Pause key for switching machine to
pause mode. If water level in the machine is appropriate
“door” led on program progress display is on and laundry
can be added to the machine. If “door” led is not on after
one minute than water level in the machine is not appropri-
ate and laundry can not be added. You can press “Start/
Pause/Cancel” key for continuing program.
Time delay for program start
Using time delay key you can delay the starting of the se-
lected program for 3 hours, 6 hours or 9 hours.
When time delay key is pressed once 3hours delay is
adjusted and led will light on. If same key is pressed once
more delay is 6hours, and if it is pressed once more 9
hours delay is selected. If time delay key is pressed again
delay is cancelled. After the selection of time delay when
“Start/Pause/Cancel” is pressed program can be started
with delay. During delay period door can be opened or
laundry can be added
After time delay is initiated by pressing “Start/Pause/Can-
cel” you can switch machine to “Pause” mode and change
delay time.