Asus K8V-VM Ultra - Инструкция (Страница 3)

ASUS K8V-VM Ultra 
English
3. System Memory
You may install 64MB, 128 MB, 256 MB, 512 MB, 1 GB unbuffered ECC or
non-ECC DDR DIMMs into the DIMM sockets using the memory configuration
in this section.
• Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot failure.
• For optimum compatibility, obtain memory modules from qualified
vendors. Visit the ASUS website (www.asus.com) for the latest DDR
400 Qualified Vendors List.
• Always install DIMMs with the same CAS Latency. For optimum
compatibility, obtain memory modules from the same vendor.
. Position the CPU above the socket such that the CPU corner with the
gold triangle matches the socket corner with a small triangle.
4. Carefully insert the CPU into the socket until it fits in place.
5. When the CPU is in place, push down the socket lever to secure the CPU.
The lever clicks on the side tab to indicate that it is locked.
4. BIOS information
The Flash ROM on the motherboard contains the BIOS. You can update the
BIOS information or configure the parameters using the BIOS Setup utility.
The BIOS screens include navigation keys and brief online help to guide you.
If you encounter system problems, or if the system becomes unstable after
you changed settings, load the Setup Defaults. Visit the ASUS website (www.
asus.com) for updates.
To enter Setup at start up:
Press <Delete> during the Power-On Self-Test (POST). If you do not press
<Delete>, POST continues with its test routines.
To enter Setup after POST:
• Restart the system by pressing <Ctrl> + <Alt> + <Delete>, then press
<Delete> during POST, or
• Press the reset button on the chassis, then press <Delete> during POST,
or
• Turn the system off and back on, then press <Delete> during POST