ViTESSE VS-212 - Инструкция (Страница 2)

Dear Customer!
You have made an excellent decision. Vitesse® “Nouveau” home range offers
you an exclusive, high quality range of appliances for your ultimate home
luxury and healthy living.
General Description
Preparing for use
The appliance is equipped with a safety system. It won't
work if the parts have not been mounted properly.
1. place the juice collector in place
2. Place the pulp container into the appliance by tilting it
forwards slightly, then it is pushed home as shown.
3. Put the filter in the juice collector. Make sure the filter is
fitted securely onto the driving shaft “Click”
4. Hold the lid over the filter and lower it into position.
5. Snap the two clamps onto the lid to lock it into place
“click” Make sure the clamps are locked into position
on either side of the lid
6. Slide the pusher into the feeding tube by allgning the
groove in the pusher with the small protrusion on the
inside of feeding tube.
P/1 P/2
www.vitesse.ru
A. Pusher
B. Feeding Tube
C. Lid
D. Filter
E. Juice Collector
F. Pulp Container
G. Clamps
H. Control Knob
I. Driving Shaft
J. Motor Unit
Important
Read these instructions for use carefully before using the appliance and save
them for future references.
•
Do not use the appliance when the mains cord, the plug or other
components are damaged. If so, please check with an authorized service
center for repair
• This appliance is intended for household use only
• Keep the appliance out of the reach of children.
• Make sure all parts are mounted correctly, and both clamps are locked
before you switch on the appliance
• Do not operate the juicer for more than two minutes at a time when juicing
heavy loads and let it cool down for Ѕ min before reuse.
• Never reach into the feeding tube with your fingers or any sharp object
while the appliance is running only the pusher is to be used for this
purpose.
• Never immerse the motor unit in water or any other liquid. Do not rinse it
either.