Инструкция по эксплуатации ViTESSE VS-705
Страница 3
P/3
P/4
•
Place the hopper plate on the head and fix into position.
•
Locate the unit on a firm place.
•
The air passage at the bottom and the side of the motor housing should be
kept free and not blocked.
MINCING MEAT
•
Cut all foods into pieces (boneless and fatless meat is recommended,
approximate size :20 mm x 20 mm x 60 mm) so that they fit easily into the
hopper opening.
•
Plug in and turn the “ON/O/ R” switch to“ON”position.
•
Feed foods into the hopper plate. Use only the food pusher (fig.7).
•
After use switch the unit off and unplug it from the power supply.
REVERSE FUNCTION
•
In case of jamming switch the appliance off by turning the “ON/O/ R”switch
to“O”position. wait at least one minute until grinder has come to a complete
stop.Then, turn the “ON/O/ R” switch to“R”position.
•
Feed screw will be rotating in the opposite direction, and the head will get
empty.
•
If it doesn't work, switch the unit off and clean it.
MAKING KIBBE
RECIPE STUFFING
Mutton
100g
Olive oil
1 1/tablespoons
Onion (cut finely)
1 1/tablespoons
Spices to your taste
Salt to your taste
Flour 1 1/tablespoons
•
Mince mutton once or twice.
•
Fry onion until brown and add minced mutton, all spice, salt and flour.
OUTLET COVER
Lean meat 450g
Flour 150-200g
Spices to your taste
Nutmeg (cut finely) 1
Powdered red pepper to your taste
Pepper to your taste
•
Mince meat three times and mix all ingredients together in a bowl. More meat
and less flour for outlet cover creates better consistency and taste.
•
Grind the mixture three times.
•
Disassemble by reversing the steps from 5-3 to remove the cutting plate and
cutting blade.
•
Place kibbe attachments A and B onto the feed screw shaft together, fitting
protrusions in the slots (fig.8).
•
Screw fixing ring into place until tight. Do not over tighten (fig.9).
•
Make the cylindrical outlet cover (fig.10).
•
Form kibbe as illustrated below and deep fry.
MAKING SAUSAGE
•
Before starting please assemble sausage attachment as per following (fig.11)
CLEANING AND MAINTENANCE
DISASSEMBLING
•
Make sure that the motor has stopped completely.
•
Disconnect the plug from the power outlet.
•
Disassemble by reversing the steps from 6-1 pictures.
www.vitessehome.com