ViTESSE VS-600 - Инструкция (Страница 2)

P/1 P/2
www.vitesse.ru
Battery power is low. Please install new battery.
Scale overload.
(max. weight capacity is indicated on the scale).
Please step off to avoid damage.
STEP 1. Put the scale on a hard & flat surface
(avoid carpet or soft surface).
Picture 1
BATTERY
3V
CR2032
+
black tab
contact
CR 20 32
battery baffle
C
2 2
R 0 3
STEP 2. Switch on the scale by slightly tapping on
the right lower corner of the glass platform.
Wait a few seconds until display prompts to
“0.0” before starting to weigh.
kg
kg
kg
kg
1 pc of lithium battery (CR2032).
Please remove the isolation sheet from the battery
contact before use.
Condition 1: Open battery case cover on the back of
scale, if battery case is the type shown in
picture 1,
A. Bend the small black tab outwards and the battery
will come out. Take note not to bend the contact.
B. Install new battery by putting one side of the battery
beneath the contact and then pressing down the
other side.
TO REPLACE BATTERY
Picture 2
Condition 2: Open battery case cover on the back of
scale, if battery case is the type shown in
picture 2,
A. Take out the used battery with the aid of a sharp
object, as shown in picture 2.
B. Install new battery by putting one side of the battery
beneath the battery baffle and then pressing down
the other side.
OPERATION
STEP 3. Gently step on the scale. Put your feet evenly
until on the scale without moving and wait
until your weight shown on display is stable
and locked.
( Note : the display will show “Err” if you step on
the scale before it shows “0.0”. In this case,
please repeat Step 2 )
When you step off the scale, it will
automatically switch off. Auto shut-off occurs
if display shows “0.0” or the same weight
reading for approximate 8 seconds.
AUTOMATIC SWITCH OFF
OVERLOAD INDICATION
LOW BATTERY INDICATION
Dear Customer!
You have made an excellent decision. Vitesse® “Nouveau” home range offers you
an exclusive, high quality range of appliances for your ultimate home luxury and
healthy living.